Operating instructions

Interrupting operation
(models with radio controls on the
handle)
To pause the vacuum cleaner during
operation:
^
Press the Stand-by button - on the
handle.
Warning: The Stand-by button is
designed to pause the vacuum
cleaner for short periods of time
whilst vacuuming. After vacuuming,
the vacuum cleaner must be
switched off and unplugged from
the mains electricity supply.
Otherwise there is a danger of
overheating and damage.
At the end of the pause, you can do
one of the following:
^ Press the Stand-by button - again to
switch the vacuum cleaner back on
at the setting you were using before
pausing it.
^
Press the + button to switch the
vacuum cleaner back on using the
highest power setting.
^
Press the - button to switch the
vacuum cleaner back on using the
lowest power setting.
Use
21