Operating instructions

When to change the thread
catcher pads
Check the thread catchers on the suc
tion inlet of the floor brush and the up
holstery nozzle from time to time. Re
place them if the pile is worn.
Replacing the thread catchers
^ Use a screwdriver or similar object to
remove them from the slots.
^ Insert the new thread catchers.
Servicing the floor roller
a Use a coin to release the roller pin
(bayonet connection), and pull out the
b Take out the roller.
Remove all threads and hair etc, then
reassemble the parts in the correct or
Spare parts are available from your
Miele dealer or from the Miele Parts De
Maintenance and care