User manual

en
42

Curtains, fabric

Upholstery, cushions

Deep pile carpets, rugs and run‐
ners

Energy-saving vacuuming. This
setting is also very quiet

Loop pile carpet and rugs

Hard flooring and heavily soiled
carpets and rugs
When using the EcoTeQ floorhead, if
the suction seems t
oo high, reduce
the suction until the floorhead is eas‐
ier to manoeuvre.
Depending on the model, your vacuum
cleaner w
ill be fitted as standard with
one of the following suction power se‐
lectors:
– Foot controls
– Radio-control handle
Foot controls (dia. 21)
The first time the vacuum cleaner is
switched on, the highest setting will be
select
e
d automatically.
After that the vacuum cleaner will
switch on at the setting which was used
pr
eviousl
y.
 Press the + foot control to select a
higher setting.
 P
ress the - foot control to select a lo‐
wer setting.
Radio-control handle (dia. 22)
When the vacuum cleaner is switched
on with the On/Off fo
ot control , the
Standby indicator  on the vacuum
cleaner will light up yellow.
 Press the Standby button  on the
handle.
The Standby indicator  on the vac‐
uum cleaner will go out.
The first time the vacuum cleaner is
switched on, the highest setting will be
select
e
d automatically.
After that the vacuum cleaner will
switch on at the setting which was used
pr
eviousl
y.
 Press the + button to select a higher
suction power level.
 Press the - button to select a lower
suction power level.
To open the air inlet valve
(dia. 23 + 24)
(not on models with radio-controls on
the handle)
It is easy to reduce the suction power
for a short time, e.g. t
o prevent rugs or
other objects being sucked into the
vacuum cleaner.
 Open the air inlet valve on the handle
far enough to reduce the suction
power.
The floorhead will be easier to manoeu‐
vre.