User manual

en
50
Problem solving guide
Problem Cause and remedy
The vacuum cleaner
switches off automati‐
ca
lly.
On certain models, the
overheating warning
light also comes on .
A temperature limiter switches the vacuum cleaner off
automa
tically if it gets too hot. This can occur if, for
instance, large articles block the suction tube or
when the dustbag is full or contains particles of fine
dust. A heavily soiled exhaust or dust compartment
filter can also be the cause of overheating.
 Switch the vacuum cl
eaner off immediat
ely using
the On/Off foot control . Disconnect from the
electricity supply. Switch off at the wall socket and
unplug it.
After removing the cause, wait for approximately 20 -
30 min
ut
es to allow the vacuum cleaner to cool
down. It can then be switched on again.