Technical information

Technical Information
17
T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
4.5 Support Bracket – Removal
1. Remove the Lid (010 4.1).
2. Remove the Fascia Panel (060 4.4)
3. Disconnect the connectors and pushbutton assembly from the
electronic.
4. Remove the rear frame of the Fascia Panel.
5. Disconnect the ground wire.
Figure 010-2: Support bracket
6. Remove the four T20 screws, Figure 010-2.
7. Lift upwards to remove the support bracket.
Reassembly Note
During re-assembly ensure the Support Bracket tabs are
completely engaged into the frame before tightening the screws.