Technical information

Technical Information
33
T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
4.6 NTC Temperature Sensor - Removal
1. Remove the Rear Access Panel (010 4.6).
1. NTC Temperature Sensor
2. Thermostats (Temperature Limiters)
3. Rubber Grommet
4. Retaining Screw (2)
Figure 030-6: Removing the access cover on the rear outer wall of the
appliance permits access to the Heater Bank, Thermostats (Temperature
Limiters) and Temperature Sensor.
2. Disconnect the connector to the Sensor.
3. Bend the sensor retaining tabs to release the sensor from the
Heater Bank Assembly.