Technical information

Technical Information
67
T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
4.3 Service Mode
Initial requirements
- Turn off the unit.
- Close the door.
Note
Once you begin the access procedure, it must be completed within
10 seconds.
Accessing
1. Press and hold the Start Button while turning the unit on.
2. Release the Start Button As soon as the Anti-crease/Finish
LED lights.
3. Immediately press and release the Start Button 2 times.
4. Press and hold the Start button a 3rd time, until the Start LED
flashes.
A slow flashing Start LED indicates successful accessing of the
Service mode.
Note
Once in the Service Mode, you automatically enter the first Service
Level position. The ROM ID is displayed by the flashing Drying
LED.
Refer to the Service Mode Tables 060-3, 060-4 060-5 and 060-6.
Service Level - Navigation
 The Service Level is indicated by a flashing a Buzzer LED.
(Example: flash…flash…flash=Level 3)
 To advance to the next Service Level, press the Buzzer Button.