Technical information

Technical Information

T1302, T1303, T1322, T1329ci, T1323c,

T1403 and T1405 Clothes Dryers

Test Step Service Level 2 – Activation and Navigation

 The Test Step is indicated by a flashing Drying LED.

 While in Service Level 2 press the Start Button to begin the first

Function Test.

 Press the Start Button to advance to the next Function Test. .

Turn the unit off to quit the test mode.

Table 060-3: Service Mode (continued on Table 060-4)

TEST STEP

Flashing

Drying LED

SERVICE

LEVEL

Flashing

Buzzer LED

SERVICE

FUNCTION

Long

Short

Function Tested/

Machine Response

– ROM ID code X Y ROM ID code XY

– – No faults registered

– 2

F2 = NTC Temperature

sensor – Heater bank

(2R30)

–

F4 = NTC Temperature

sensor – Drum Support

Housing (1R30)

F41 = Model type changed

(vented / condenser) or

EEPROM fault

To display a stored fault -

Press the Start button.

To view additional stored

fault(s) - Press the Start

button again.

To delete fault(s) - Press and

Hold the Start button for at

least 5 seconds.

F55 = Program time limit

exceeded