Operating Instructions Condenser Dryer T 1339 C To prevent accidents and machine damage, read these instructions before Installation or use. UV M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before loading the dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1. Turn on the dryer and load the laundry . . .
IMPORTANT SAFETY INSTRUCTIONS ,WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Read all instructions before using the appliance. Do not dry articles that have been previously cleaned, washed, soaked or spotted with gasoline, dry-cleaning solvents or other flammable or explosive substances. They may give off vapors that could ignite or explode. Do not allow children to play on or in the appliance.
IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Control panel a e- "PROGRAMS" buttons For selecting a drying program. b "OPTIONS" buttons For selecting a drying option. c "DRYNESS" button For selecting the dryness level of finished laundry. d "STATUS" display Shows the current cycle of the drying program. e "Buzzer" button When selected, a buzzer will sound at the end of a program. g "Start/Stop" button T Starts and stops a program. Interrupts a program when pressed. Flashes during program selection and lights once the program starts.
Before loading the dryer Program recommendations The dryer must be correctly installed and connected before the first use. Please refer to the "Installation Instructions". ^ Before using for the first time clean the drum with a cloth. Before drying, check fabric care labels for special drying instructions.
Using the dryer 1. Turn on the dryer and load the laundry 2. Select a program ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry loosely into the drum. ^ Make sure the lint filters are in place. ^ Close the door with a firm swing - do not push it shut. For best results use liquid fabric softener when washing laundry. Fabric softener sheet may clog the filters and cause the dryer to overheat.
Using the dryer Program Normal Fabric Extra Dry Multi-layer fabrics, mixed loads of sturdy cottons, e.g. jeans, towels. More Dry Uniform loads of cotton, e.g. sheets, underwear, socks. Normal Knitted cotton fabrics that may shrink, e.g. jersey material or lightweight cottons. Less Dry Cotton or linen fabrics to be left damp for ironing. Hand Iron Rotary Iron Note Available drying options: Turbo, Gentle, Anti-crease Cotton or linen fabrics which will be ironed with a rotary iron.
Using the dryer 3. Select a drying option (if needed) OPTIONS Turbo Fast drying for sturdy fabrics with increased temperature and a reduced program length. Gentle For drying delicate fabrics slowly at a lower temperature. Anti-crease ^ A drying option can be selected or deselected with each press of the button. Prevents wrinkles if laundry is not removed immediately after the end of a program. The drum periodically rotates for about 1 hour.
Using the dryer 4. Select the dryness level 5. Select the buzzer (if desired) The dryness level can be selected in the "Normal" and "Wrinkle-free" programs. (The dryness level of the other programs cannot be adjusted.) ^ Press the "Buzzer" button to have a tone beep at the end of the program.
Using the dryer 6. Start the program 7. At the end of a program The "Anti-crease/End" indicator will light at the end of a program and the buzzer will sound if it was selected. ^ Press the "Start/Stop" button. Once the program starts, the current cycle of the program will be indicated in the "STATUS" display. If a fault occurred, a "FAULT" indicator will light. See "Frequently asked questions" for details. ^ Press the "Door" button. ^ Open the door. ^ Remove the laundry. ^ Check that the drum is empty.
Using the dryer Canceling or changing a program Adding or removing laundry during a program ^ Press and release the "Start/Stop T" button to stop the drying program. ^ Turn off the dryer using the "On/Off" button. To continue drying: ^ Press the "Door" button. ^ Select the new program by pressing the e or - button. ^ Open the door. ^ Select any desired options. ^ Select a dryness level (available in the "Normal" and "Wrinkle-free" programs).
Child lock Child lock To deactivate the child lock When activated, the child lock prevents the dryer from being operated by locking the control panel functions. Repeat steps 1. to 5. The dryer can be turned on but not started. The "Child lock" indicator will flash. The "Child lock" indicator will go out. The control panel is now unlocked. 6. Turn off the dryer using the "On/Off" button. The door can be opened. To activate the child lock 1. Make sure the dryer is turned off and the door is closed. 2.
Dryer care Cleaning the lint filter The lint filter must be cleaned after every program. ^ Remove the lint from the door frame lint filter with your fingers. ^ Open the door and remove the lint filter by gently lifting it upwards. ^ Any lint remaining in the hollow casing of the door can be removed through the gap at the bottom with a dust brush or vacuum. ^ Return the lint filter and close the door. The lint filters (once removed from the dryer) can be rinsed with hot water if necessary.
Dryer care Cleaning the exterior and the control panel ,To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dryer. They will damage the surface. ^ The exterior and the control panel can be cleaned with warm water and liquid dish soap applied with a soft sponge.
Dryer care Emptying the condensed water container Depending on the installation, the condensed water will either be pumped to a drain or collected in the condensed water container, located in the upper left corner of the machine. The container holds approximately 1 gallon of water. The container should be emptied weekly. Should the container be full when the tumble dryer is started, or if it becomes full during normal operation: ^ Pull out the container slightly to the right with both hands.
Dryer care Cleaning the condenser ,To reduce the risk of electric Removing the condenser ^ Open the door. shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. Detergent residues, hair and lint in the drying air can penetrate filters and clog the condenser. Particles from the cool air sucked in from the install location can cause blockages. ^ Check the condenser at least twice a year.
Dryer care Checking the condenser ^ Hold the condenser against the light. ^ Turn the condenser lock up. ^ Look through the front and left side (as illustrated above) of the condenser to check for lint. If no lint is visible: ^ Return the condenser. If lint is visible: ^ Clean the condenser as described. ^ Pull out the condenser.
Dryer care Cleaning the condenser Returning the condenser ^ Rinse the condenser along all sides with warm water as shown in pictures below. ^ Put the condenser back in place in the reverse order. Check the gasket around the front of the condenser is flush and not crimped. ^ To prevent leaks, make certain the condenser is pushed in all the way and locked in place. ^ Restore power. ^ Check the condenser for visible soiling. Continue rinsing until the condenser until clean.
Dryer care Changing the light bulb ,To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. ^ Open the door. The bulb cover is located along the upper rim of the drum opening. ^ Replace the light bulb with a temperature proof bulb, available from Miele. The light bulb must not exceed the maximum wattage listed on the data plate.
Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the dryer.
Quick Guide 1.Turn on the dryer and load the laundry 2. Select a program ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry into the drum. Make sure that there is enough space in the drum for clothes to tumble freely. ^ Press the e or - button until the desired program indicator lights. 3. Select a drying option (if needed) To prevent fabric damage, check that laundry will not be caught in the closed door.
Quick Guide 4. Select the dryness level 5. Select the buzzer (if desired) 6. Start the program ^ Press the "Start/Stop" button. 7. At the end of a program The "Anti-crease / End" indicator will light. ^ Press "Door" and remove the laundry. ^ Press the selection button until the desired indicator illuminates. ^ Clean the lint filter. ^ Press the "On/Off" button to turn off the dryer.
Quick Guide Program Normal When to use Note Available drying options Turbo, Gentle, Anti-crease Extra Dry For laundry to be folded and shelved immediately, e.g. jeans, towels. More Dry For uniform loads, e.g. sheets, underwear, socks. Normal For knitted items that may shrink, e.g. jersey material or lightweight cottons. Less Dry For items to be left damp for ironing. If items are still damp, dry again using "More Dry". If fabrics are too damp, dry again using "Less Dry".
Frequently asked questions What if the dryer will not run? Possible fault Fix The "Start/Stop" button was not pressed. Make sure the dryer is on. Press the "Start/ Stop" button to begin the drying program. The circuit breaker tripped or the dryer is unplugged. Make sure the dryer is plugged in or reset the circuit breaker. The door is not closed. Close the door properly. How do I prevent static cling? Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer.
Frequently asked questions What if the "Filter/Vent" fault indicator is lit? Possible fault Fix The lint filter is clogged. Clean the lint filters. See "Dryer care". The air supply in the room is insufficient. Open a window or door to increase airflow. What if the program runs too long or stops? Possible fault Fix The airflow is insufficient in the area of the dryer. Open a window or door to increase airflow. The lint filters are clogged. Clean the lint filters (see "Dryer care").
Technical Service In the event of a fault you cannot fix yourself, please contact the Miele Technical Service Department U 1-800-999-1360 techserv@mieleusa.com V 1-800-565-6435 service@miele.ca PC Update The indicator on the control panel marked PC allows a technician to update the dryer to make use of new technology. For example, if new programs or fabrics are developed, a service technician will be able to modify the existing program cycles accordingly.
24
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty. Be sure to observe local building codes. WARNING – Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded.
Caring for the environment Disposal of the packing materials The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. To prevent suffocation of children, ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Disposal of an appliance Old appliances may contain materials that can be recycled.
Washer / Dryer Stack The tumble dryer can also be placed on top of a Miele washing machine for a stacked installation. An appropriate stacking kit is required. The stacking kit is available from your Miele dealer or the Miele Technical Service Department. ,Installation of the stacking kit must be performed by a Miele authorized technician. Height of a stacked installation 5’ 6 3/8" (168.
Electrical connection GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Installation Front view a Power cord with plug f Four height adjustable feet b Condensed water container g Optional drain hose: An alternative to using the condensed water container is to drain condensed water into a sink, standpipe or gully.
Installation Installation site ,Do not install the dryer in an area where it can be blocked, e.g. behind a door. Transporting the dryer to the installation site The rear excess end of the lid has a handle box for transport. ^ Use the front dryer feet and the rear excess end to transport the dryer from the packaging base to the installation site. Installation beneath a counter ,When the machine lid needs to be removed to reduce the height of the machine, a built under spacer kit* is necessary.
Installation Installation tips Level the dryer An airflow gap of 3/8" (10 mm) must be provided between the machine and the floor. This airflow gap must not be blocked by a toekick or thick piled carpets. Do not install the dryer next to a refrigerator. The warm air exhausting from the dryer will affect the thermostat of the refrigerator, causing it to run continuously. ^ The dryer must be level to ensure safe and proper operation.
Installation Installing the decor panel The door can be fitted with a customized door panel (optional accessory) to match the adjacent cabinets. Decor panel measures Width . . . . . . . . . . . . . 23 1/ 4" (591 mm) Height . . . . . . . . . . . . . 23 3/8" (593 mm) Thickness . . . . 1/16" - 3/16" (1.6 - 4.8 mm) ^ Open the door. ^ A decor panel up to 3/16" thickness can be inserted if the frame sides are pushed forward. ^ Insert the decor panel from above.
Installation Shortening the door panel Installation The door panel can be shortened to match the height of the adjacent cabinetry. ^ Open the door. The measure X equals the space from the bottom of the washer door to the bottom of the adjacent cabinet. Cut the bottom of the door panel with a jigsaw according to X. Cut the side decor bars with a hacksaw. ^ To remove the door panel unscrew the 10 screws (arrows) from the door sheet panel.
Installation External water drain Rear dryer bottom: When drying is in progress, condensed water is pumped into the condensed water container through the drain hose at the back of the dryer. The condensed water can be drained directly into a drain if the machine is installed near a sink or standpipe so that the condensed water container does not have to be emptied. Drain hose length: approx. 3 ft. (1 m) An extension hose is available as and optional accessory. Maximum Drain height: 4 ft. (1.
Installation If the external drain is not longer used ^ Insert the drain hose into the holder and secure it at the rear dryer top (see holder). ^ Use the clamps at the dryer rear to secure the drain hose.
37
38
39
All rights reserved / 1705 M.-Nr.