Operating instructions

Problem solving guide
What to do if . . . ?
With the help of the following notes minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
Repairs to the machine should only be undertaken by a suitably qualified
service engineer to ensure safety. Unauthorised repairs could be dangerous.
Fault Possible cause Remedy
The machine fails to
start when switched on.
No obvious cause. Check that
– the door is properly
shut.
– the machine is
switched on at the
mains and the fuse is
not defective.
The progamme has
been interrupted.
The load was too small
or consisted of individual
items which caused the
programme to finish
prematurely.
– Dry small amounts of
laundry using the
Timed Drying
C
programme.
Laundry is not suffi-
ciently dried.
The load consisted of too
many types and
thicknesses of fabric.
– Select a more suitable
programme next time
(see "Programme
overview")
Problem solving guide
18