Operating instructions

To change the lamp
Disconnect the machine from the
mains electricity supply.
Open the door.
Unscrew the plastic cover inside the
drum, above the door.
The lamp must not exceed the maxi-
mum wattage quoted on the data
plate and on the plastic light cover.
The temperature resistant lamp should
be ordered from your Miele Dealer or
the Miele Spare Parts Department only.
Replace the lamp and screw the
plastic cover back on.
The cover must be fixed securely,
as otherwise moisture may seep in
and cause a short circuit.
To open the door during a
power cut
Pull the door open.
Problem solving guide
21