Operating instructions

Aligning the machine
The machine must be perfectly level to
ensure safe and proper installation.
The screw feet can be adjusted to
compensate for any unevenness in
the floor.
Take into consideration the space re-
quired by the vent duct when calculat-
ing the distance between the machine
and a wall or other appliances etc. to
the sides or rear of the machine.
A ventilation gap of 10 mm must be
maintained between the base of the
machine and the floor. This must
not be blocked by sealing strips,
deep pile carpet etc., as otherwise
there will be insufficient flow of cool
air for the machine to function cor-
rectly.
The machine must not be built
under.
Coin mechanism / Time
counter
This dryer can be fitted with a coin
mechanism.*
It can also be connected to an existing
time counter using a special connec-
tion cable*.
Do not use devices to turn the machine
off automatically, (e.g. automatic
timers).
The tumble dryer can be combined
with a Miele washing machine in a
washer-dryer stack. For this purpose
the appropriate stacking kit * is re-
quired.
* These items are all available from
your Miele Dealer or the Miele Profes-
sional Sales Dept.
Installation
25