Operating instructions

Help to protect the environment
Disposal of the packing
material
The transport and protective packing
has been selected from materials
which are environmentally friendly for
disposal and can normally be recycled.
Rather than just throwing these ma-
terials away, please ensure they are of-
fered for recycling.
Disposal of your old machine
Old machines contain materials which
can be reclaimed or recycled. Please
contact your dealer, your local waste
collection centre or scrap merchant
about potential recycling schemes.
Ensure that the machine presents no
danger to children while being stored
for disposal.
Energy saving tips
Make sure that your laundry is thor-
oughly spun before drying. You will
save up to 30% energy and time if
laundry is spun at 1200 rpm instead
of at 600 rpm.
Load according to the optimum
amount of washing recommended
for the programme being used.
Underloading is uneconomical. Over-
loading gives a poorer quality of
drying and may cause unnecessary
creasing.
To save energy and time:
– make sure the room in which the
dryer is located is well ventilated.
– Make sure the fluff filter is clean be-
fore using the dryer.
The vent ducting should be as short,
straight and smooth as possible. Ex-
pelled air is slowed down in the vent
duct due to friction against the inner
walls of the ducting, therefore the
shorter the duct and the smoother
the inner walls, the less friction oc-
curs which in turns saves drying time
and energy costs.
Help to protect the environment
7