Operating instructions

Extending the cooling down
time
The Cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to
handle.
The bar chart shows you the setting.
The machine is delivered with 0 mins
(normal cooling down period) set as
standard.
0 min
18 min
Set extended cool-down
^ Select the extended time you want (in
2 minute increments) and confirm
your selection with the
OK button.
– The programme duration will
increase accordingly.
– You cannot extend the Cooling down
time for the
Warm air, Cool air,
Woollens handcare or Smoothing
programmes.
Airways indicator
Fluff should be removed after drying.
The
Clean fluff filters indicator will
remind you to clean the filters when a
certain amount of fluff has collected
in the filters. You can decide at what
level of fluff this reminder should be
given.
You will have an idea of how often this
should be done after a few drying
programmes.
Off
= Clean fluff filters
does not appear
Heavy
= Clean fluff filters
only appears when there is
a heavy build-up of fluff
Normal
= Factory default setting
Light
= Clean fluff filters
appears when there is only
a small build-up of fluff
A tick
B will appear beside the option
to show that it has been set.
C Back A
IA
Off
Heavy
H
^
Select the option you want and
confirm your selection with the
OK
button.
Settings menu J
48