Operation Manual

Note
Anti-crease
If the laundry is not removed from the machine
at the end of the programme an anti-crease
phase switches in automatically. There is
drum movement at intervals to minimise
creasing in the laundry.
The anti-crease phase lasts about 59 minutes.
Interrupting the programme
The door can be opened during operation to
add articles of laundry. Do not reach into a
moving drum.
To continue the drying process:
Close the drum door.
The fan automatically switches on as a
safety measure if the temperature in the in-
terior of the dryer is too high.
The programme sequence lights for drying,
cool air, anti-crease/end and the data in
the display flash.
Press the h Start button.
If the drying programme has been interrupted,
either by opening the door, opening the fluff fil-
ter panel (6), or operating the Emergency stop
switch, the Start button has to be pressed to
start the programme again.
If a different programme is required, first turn
the programme selector to the
r
End posi-
tion and then to the desired programme.
Press the Start button to start the new pro-
gramme.
The On indicator light flashes if the
programme selector is turned to a different
position after the start of a programme. It
stops flashing when the programme selector
is turned back to the programme originally
selected or is turned to the
r
End position to
finish the programme.
Emergency stop switch
Only use this switch in an emergency. When
activated the tumble dryer is stopped immedi-
ately. Do not use it in normal operation to
switch the machine off.
To reset the Emergency stop switch after it
has been used, turn the ribbed disc clockwise.
12 «M.-Nr. 06 411 820 - GB - »