Operating instructions Heat pump tumble dryer It is essential to read these operating instructions before installing and using the appliance. This prevents both personal injury and damage to the appliance. en-AU, NZ M.-Nr.
Contents Caring for the environment ............................................................................. 5 Warnings and safety instructions ................................................................... 6 Operating the tumble dryer .............................................................................. 18 Control panel ....................................................................................................... 18 How the control panel works ...............................
Contents Fragrance flacon................................................................................................ Using a fragrance flacon ..................................................................................... Removing the protective seal from the fragrance flacon................................ Inserting the fragrance flacon......................................................................... Opening the fragrance flacon ...........................................................
Contents Installation.......................................................................................................... Front view ............................................................................................................ Rear view............................................................................................................. Transporting the tumble dryer .............................................................................
Caring for the environment Disposal of the packing material Disposing of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electronic and electrical appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for their correct functioning and safety.
Warnings and safety instructions It is essential to read these instructions. This tumble dryer contains a refrigerant that is flammable and explosive. This tumble dryer complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property. Read the operating instructions carefully before using the tumble dryer. They contain important information on safety, installation, use and maintenance of the appliance.
Warnings and safety instructions Correct application This tumble dryer is designed for domestic use and for use in similar environments by guests in hotel or motel rooms, bed & breakfasts and other typical living quarters. This does not include common/shared facilities or commercial facilities within hotels, motels or bed & breakfasts. This tumble dryer is not suitable for outdoor use.
Warnings and safety instructions Technical safety Before setting up the tumble dryer, check it for any externally visible damage. Do not install or use a damaged tumble dryer. Before connecting the tumble dryer, ensure that the connection data on the data plate (fuse rating, voltage and frequency) matches the mains electricity supply. If in any doubt, consult a qualified electrician.
Warnings and safety instructions Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele authorised service technician, otherwise any subsequent damage will not be covered by the warranty. Faulty components must only be replaced by genuine Miele spare parts. Miele can only guarantee the safety of the appliance when Miele replacement parts are used.
Warnings and safety instructions This tumble dryer is supplied with a special lamp to cope with particular conditions (e.g. temperature, moisture, chemical resistance, abrasion resistance and vibration). This special lamp must only be used for the purpose for which it is intended. It is not suitable for room lighting. Replacement lamps may only be replaced by a Miele authorised technician. This tumble dryer uses a gaseous refrigerant which is condensed by the compressor.
Warnings and safety instructions The R290 refrigerant contained in this tumble dryer is flammable and explosive. If the tumble dryer is damaged, proceed as follows: - Avoid naked flames or anything which creates a spark. - Disconnect the dryer from the electricity supply. - Air the room where the tumble dryer is located. - Contact Miele Customer Service. Risk of fire and explosion due to damage to the tumble dryer. The refrigerant is flammable and explosive if it leaks.
Warnings and safety instructions Correct use Warning: Risk of fire / Flammable materials. To avoid the possible danger of fire, please read these warnings carefully. A clogged filter is a fire hazard! The fluff filter must be cleaned after every programme. The maximum load for this tumble dryer is 7.0 kg (dry weight). See the “Programme chart” for the maximum recommended loads for individual programmes. To prevent the risk of fire, do not connect the tumble dryer via a controllable socket (e.g.
Warnings and safety instructions The fluff filters and the plinth filter must be thoroughly dried after cleaning. Do not replace them if they are damp or wet. Damp or wet filters could cause operational faults. Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire.
Warnings and safety instructions When washing such heavily soiled items: Ensure that you use a larger quantity of detergent and select a high temperature. If in doubt, wash the items several times. To prevent the risk of fire, the following textiles must never be dried in the tumble dryer: - Textiles that have been cleaned using chemicals (e.g. professional dry-cleaning agents). - Textiles which contain a large proportion of rubber, foam rubber or rubber-like materials.
Warnings and safety instructions In many programmes, the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them (this also avoids the danger of the laundry selfigniting). The programme is not finished until the cooling down phase has been completed. As soon as the programme has finished, remove all laundry from the drum. Always close the door after use.
Warnings and safety instructions Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. The fragrance flacon must be stored in its packaging so please make sure you retain this. Caution. The fragrance can run out of the flacon. Make sure that you always keep the flacon, or the fluff filter with the flacon inserted in it, upright when carrying and do not tip it or place it down on any surface.
Warnings and safety instructions Accessories Only use genuine Miele spare parts and accessories with this appliance. If spare parts or accessories from other manufacturers are used, this will invalidate the warranty, and Miele cannot accept liability. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
Operating the tumble dryer Control panel a Control panel b Sensors for the drying levels c Indicator lights light up when necessary d Gentle tumble sensor for gentle drying e Time display for the programme duration 18 f Sensors for time selection g Start/Add laundry sensor for programme start and adding laundry h Optical interface for service technicians i Programme selector for selecting programmes and for switching off.
Operating the tumble dryer How the control panel works Indicator lights - lights up when the condensed water container needs to be emptied. - lights up when the plinth filter needs to be cleaned. - Perfect Dry The Perfect Dry system measures the residual moisture present in the laundry in programmes with selectable drying levels and provides a more precise drying result. The , , , and sensors react to fingertip contact. Selection is possible as long as the respective sensor is illuminated.
Operating the tumble dryer Time display Drum lighting The remaining programme duration will be displayed in hours and minutes. The lighting helps to ensure that all items are removed from the drum. The drum lighting will go out automatically to save energy. With most programmes, the duration displayed may vary or “jump”. The following factors, among others, affect the programme duration displayed: the quantity of the laundry, the type of fabric and the residual moisture in the laundry.
Before using for the first time Downtime after installation Damage to the tumble dryer by switching it on too soon. This can damage the heat pump. After setting up the tumble dryer, wait for at least one hour before switching it on. Removing the protective foil and stickers Remove: - the protective foil from the door - any stickers from the front and the lid Please do not remove any labels (e.g. the data plate) which are visible when you open the door.
Energy saving tips This dryer with heat-pump technology is designed for energy-saving drying cycles. You can save even more energy with the following measures, because the drying time is not extended unnecessarily. - Make sure your laundry is spun at the maximum spin speed before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying, e.g. approx. 20 % energy can be saved if spinning laundry at 1600 rpm instead of 1000 rpm.
1. Notes on correct laundry care Points to note regarding washed laundry - When washing very heavily soiled items, ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times. - Do not put soaking wet items into the tumble dryer. Make sure your laundry is thoroughly spun before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying.
1. Notes on correct laundry care Drying Care label symbols Useful tip: See the “Programme chart”. It lists all programmes and their maximum load. Drying - Always observe the maximum recommended load for each programme. This will mean that the energy consumption for the amount of laundry is the most economical. Reduced temperature* - Down-filled garments have linings which have a tendency to shrink, depending on the quality of the item. Only use the Pre-ironing programme for these textiles.
2. Loading the tumble dryer Loading the laundry Textiles may be damaged. Before loading the dryer, read “1. Notes on correct laundry care”. Check that the drum is empty. Remove any items that might be blocking the drum. Socket for the fragrance flacon See the section “Fragrance flacon” for information on how to use fragrance flacons. If you are not using a fragrance flacon: Push the tab down completely (see arrow) so that the socket is closed. Otherwise, fluff will accumulate here.
3. Selecting a programme and starting it Selecting a programme The dryer is switched on by selecting a programme, and switched off by turning the programme selector to the position. Selecting a drying level with a drying programme Cottons, Minimum iron, Delicates, Shirts, Express, Denim, Bed linen, Preironing The preset drying level for the programme can be changed if required. Turn the programme selector to a programme. A drying level may light up and durations will appear in the time display.
3. Selecting a programme and starting it Selecting timed drying programmes and other programmes Warm air You can set the duration in ten-minute increments from minutes to hours. Selecting Gentle tumble Delicate fabrics (with the symbol on the care label, e.g. acrylic garments) are dried at a lower temperature. The programme duration is longer. Touch the Gentle tumble sensor. It then lights up brightly.
3. Selecting a programme and starting it Altering Delay start Selecting Delay start With Delay start you can delay the start of a programme from minutes up to . However: Delay start cannot be used with the Warm air programme. Touch the sensor. The sensor lights up brightly. Touch the or sensor repeatedly until the required delayed start time appears in the time display.
3. Selecting a programme and starting it Starting a programme Energy savings Touch the flashing Start/Add laundry sensor. After 10 minutes, the indicators dim. The Start/Add laundry sensor flashes slowly. The Start/Add laundry sensor lights up. Programme sequence - If Delay start has been selected, the Delay start time will start to count down first. - The programme starts.
4. Removing the laundry at the end of the programme End of programme/Anti-crease End of programme: lights up in the time display and the Start/Add laundry sensor goes out. The end of the programme is followed by the Anti-crease phase, which will run for up to 2 hours. There is no Anticrease with Woollens handcare. See “Programmable functions - Anti-crease”. Removing the laundry Only open the door when the drying process has finished.
Programme chart All weights marked with * are based on the weight of dry laundry. Cottons Max. load 7.0 kg* Items Cotton items such as those described under Cottons Normal with normal residual moisture. Notes Items are dried to a Normal level only. Cottons Max. load 7.0 kg* Extra dry, Normal Items Single and multi-layered cotton fabrics. For example: towelling, jerseywear, T-shirts, underwear, baby clothes, workwear, covers, aprons, jackets, bathrobes, and flannelette bed linen.
Programme chart Woollens handcare Max. load 2.0 kg* Items Woollen garments and fabric containing wool blends, e.g. pullovers, cardigans, stockings. Notes - Wool and wool blend items are only fluffed up; they are not dried completely. - Remove garments as soon as the programme has finished. Shirts Max. load 2 kg* Normal, Hand iron Items Shirts and blouses. Express Max. load 4 kg* Extra dry, Normal, Hand iron, Machine iron Items Hard-wearing garments suitable for the Cottons programme.
Programme chart Pre-ironing Max. load 1 kg* Normal, Hand iron Items - Cotton and linen fabrics. - Minimum iron items made of cotton, synthetic or mixed fibre. For example: cotton trousers, jackets, anoraks, and shirts. Notes - This programme smoothes out creasing caused during the spin cycle in the washing machine. - This programme is also suitable for dry fabrics. - Please remove the garments as soon as the programme has finished. Warm air Items Max. load 7.
Changing the programme sequence Changing a programme after it has started It is no longer possible to change the selected programme. This prevents the appliance being operated unintentionally, e.g. by children. If you adjust the programme selector, the symbol will light up in the time display. The symbol goes out when you select the original programme. Cancelling the current programme Turn the programme selector to the position. The programme is cancelled. You can now select a new programme.
Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. To prevent water running out, keep it in a horizontal position when carrying it. Hold the condensed water container by the front panel and at the back. Empty the condensed water container after every drying programme. The indicator will light up when the maximum level in the condensed water container is reached.
Fragrance flacon Using a fragrance flacon Fragrance flacons (optional accessories) can be used to give your laundry a pleasant scent. Removing the protective seal from the fragrance flacon Only hold the fragrance flacon as illustrated. Do not hold it at an angle or tip it as the fragrance will leak out. Risk of fire and harm to health if fragrance flacons are used incorrectly. Leaked fragrance can be harmful to your health if it comes in contact with the body. Leaked fragrance can cause a fire.
Fragrance flacon Inserting the fragrance flacon Open the door of the tumble dryer. The fragrance flacon is inserted in the upper fluff filter next to the recessed grip. Markers and must line up with each other. Open the cover using the tab until the tab is right at the top as shown. Turn the outer ring clockwise a little. The fragrance flacon can slip out. Turn the outer ring so that markers and line up. Insert the fragrance flacon in the opening as far as it will go.
Fragrance flacon Opening the fragrance flacon Closing the fragrance flacon Before drying, you can select the intensity of the fragrance. After drying, the fragrance flacon should be closed to prevent the fragrance from escaping needlessly. Turn the outer ring clockwise: the further you open the fragrance flacon, the more intense the fragrance. The fragrance is only released into the laundry effectively with damp laundry and longer drying times with sufficient heat transfer.
Fragrance flacon Removing/replacing the fragrance flacon Turn the outer ring anti-clockwise until markers a and b line up. Replace the fragrance flacon with a new one. When not in use, you can store the fragrance flacon in its original packaging. Fragrance flacons are available to order from Miele or via the Miele online shop. Fragrance can leak. Do not lay the fragrance flacon down.
Cleaning and care Fluff filters This tumble dryer has 2 fluff filters in the door opening: The upper and lower fluff filters trap fluff produced during the drying process. Clean the fluff filters after each drying programme. This prevents an extension of the programme duration. Also clean the fluff filters when the indicator light comes on. To turn the indicator light off: Pull the upper fluff filter forwards to remove it. Open and close the door while the dryer is switched on.
Cleaning and care Remove the fluff from the filter surface of all the fluff filters and the perforated laundry deflector (see arrows). Turn the yellow dial on the lower fluff filter in the direction of the arrow (until you hear it click). Push the upper fluff filter back until it clicks into position. Close the door.
Cleaning and care Use a vacuum cleaner with a long crevice nozzle attached to remove any visible fluff from the upper air flow openings. Finally, clean the fluff filters with water. Cleaning the fluff filters with water Wipe the smooth plastic surfaces of the fluff filters with a damp cloth to clean them. Rinse the filters with warm running water. Shake the fluff filters thoroughly and then dry them carefully. Ensure the filters are dry before replacing them.
Cleaning and care Cleaning the plinth filter Clean the plinth filter whenever the indicator light comes on or when the programme duration is longer than usual. To turn the indicator light off: Open and close the door while the dryer is switched on. Removing the plinth filter Pull the plinth filter out by the handle. When the plinth filter is pulled out, the right guide pin will slide out. The guide pin prevents the flap from being closed without the plinth filter in place.
Cleaning and care Cleaning the plinth filter Pull the handle out of the plinth filter. Fit the plinth filter back on the handle the right way round. Clean the filter thoroughly under running water. Squeeze the plinth filter very carefully several times as you rinse it. Rinse the plinth filter until all visible residues have been removed. Use a damp cloth to remove any fluff from the handle. Damage caused by a damaged or worn filter.
Cleaning and care Cleaning the plinth filter flap Cleaning the dryer Disconnect the dryer from the electricity supply. Damage due to the use of unsuitable care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use solvents, abrasive cleaners, glass cleaners or allpurpose cleaners. Use a damp cloth to remove any fluff. Make sure that you do not damage the rubber seal when doing this. Close the heat exchanger access panel.
Problem solving guide With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call. Please note that a call-out charge will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions.
Problem solving guide Problem Possible cause and remedy and flash again after a programme cancellation, despite thorough cleaning. The plinth filter looks clean after thorough cleaning. However, the programme is terminated again and the error message appears again. There are probably still deeper residues which could not be removed. To switch off : Switch the tumble dryer off and back on. Check all of the possible causes described below. The heat exchanger is clogged.
Problem solving guide Problem Possible cause and remedy flashes/lights up Access via a code has been activated. after the tumble dryer is See “Programmable functions - PIN Code”. switched on and a programme cannot be selected. and another number combination flash after a programme has been cancelled, a signal sounds. There is no obvious cause. Switch the dryer off and then on again. Start a programme. : lights up and the programme has been cancelled, a signal sounds.
Problem solving guide Unsatisfactory drying results Problem Possible cause and remedy The laundry is not sufficiently dry. The load consisted of different types of fabric. Finish drying using the Warm air programme. Select a more suitable programme next time. Useful tip: You can alter the drying levels for some programmes. See “Programmable functions”, sections “ Cottons drying levels”, “ Minimum iron drying levels”. Laundry or feather filled The laundry was washed with insufficient detergent.
Problem solving guide The drying process takes a long time. Problem Possible cause and remedy The drying process goes on for too long or even switches off.* The room in which the tumble dryer is located is too warm. Ventilate the room thoroughly. Detergent residues, hair and fine fluff can clog the filters. Clean the fluff filters and the plinth filter. Remove visible fluff from the heat exchanger. The laundry is unevenly distributed or has rolled up. The tumble dryer has been overloaded.
Problem solving guide Other problems Problem Possible cause and remedy There are humming noises. The compressor is operating. These noises are quite normal and do not indicate a fault. A programme cannot be There is no obvious cause. started. Connect the tumble dryer to the mains electricity supply Turn on the tumble dryer. Close the door. Check whether the mains fuse has tripped. Has there been a power cut? When power is restored, any previously running programme will restart automatically.
Problem solving guide Replacing the plinth filter Deformations The heat exchanger can clog up. Replace the plinth filter immediately (replacement filters are available as an optional accessory) if you see the following signs of wear before or after cleaning. Poor fit Deformations indicate that the filter has become worn. The edges of the plinth filter do not sit properly and the filter is deformed. Fluff will blow into the heat exchanger unfiltered through edges that do not sit properly.
Problem solving guide Cracks, tears, indentations Fluff will blow into the heat exchanger unfiltered through cracks and tears and will cause obstruction. This will eventually cause obstruction in the heat exchanger. White residues or residues of other colours Residues arise from laundry fibres and residual detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crusts.
Problem solving guide Regenerating the plinth filter Checking the heat exchanger You can regenerate one or more dirty plinth filters in the washing machine. The plinth filter will be ready for use again. Risk of injury from sharp cooling Before regenerating it, check whether the plinth filter is still in good condition. Check the plinth filter in accordance with the descriptions in "Problem solving guide - Replacing the plinth filter". If the plinth filter is worn, replace it.
Service Contact in case of fault Optional accessories In the event of any faults which you cannot remedy yourself, please contact Miele. Optional accessories for this tumble dryer are available from Miele (see contact details at the back of these instructions). You can book a Miele customer service call-out online at www.miele.com.au/service. Contact information for Miele can be found at the end of this booklet. Please quote the model and serial number of your appliance when contacting Miele.
*INSTALLATION* Installation Front view a Mains connection cable b Control panel c Condensed water container – empty after every drying cycle d Door – do not open during drying 56 e Heat exchanger access panel – do not open during drying f Four height adjustable screw feet g Cool air intake grille – do not obstruct with a laundry basket or other objects h Hose for external drainage of condensed water
*INSTALLATION* Installation Rear view a Protruding lid for holding when moving the tumble dryer (see arrows) b Drain hose for condensed water c Hook for winding the mains cable around during transport d Mains connection cable Transporting the tumble dryer Danger of injury to people and damage to property caused by moving the appliance incorrectly. If the tumble dryer tips over, there is a danger of injury to people and damage to property. Ensure that the tumble dryer is stable during transportation.
*INSTALLATION* Installation Installation Levelling the dryer The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted. Make sure the dryer door can be opened without hindrance after installation. The appliance must stand perfectly level to ensure safe and proper operation.
*INSTALLATION* Installation Risk of fire and explosion due to damage to the tumble dryer. The refrigerant is flammable and explosive. Do not make any alterations to the tumble dryer. Take measures to protect the tumble dryer against damage. If the tumble dryer is damaged, proceed as follows: - Avoid naked flames or anything which creates a spark. - Disconnect the dryer from the electricity supply. - Air the room where the tumble dryer is located. - Contact Miele Customer Service.
*INSTALLATION* Installation Ventilation The cool air intake at the front of the tumble dryer must not be blocked or covered. This would hinder a sufficient intake of cool air for the heat exchanger. Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings, deep pile carpet etc. This would hinder a sufficient flow of air to the tumble dryer.
*INSTALLATION* Installation Additional installation requirements Risk of injury from an electrical shock when the appliance lid is removed. There is a risk of electric shock because electrically charged components in the dryer are accessible with the lid removed. For safety reasons, the tumble dryer must be disconnected from the electricity supply. Suitable for pushing under a worktop Appliance defect due to a build-up of heat.
*INSTALLATION* Installation Externally draining condensed water Notes When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be drained away via the drain hose. The condensed water container will then not need to be emptied. Hose length: 1.49 m Maximum delivery head: 1.00 m Maximum drain hose length: 4.
*INSTALLATION* Installation Arranging the drain hose Examples Damage to the drain hose Drainage into a laundry tub or floor gully through incorrect handling. The drain hose can suffer damage and leak. Do not pull on the drain hose and do not stretch it or allow it to become kinked. Use the hose holder to secure the drain hose. There will be a small amount of residual water left in the drain hose. Have a container ready to collect this. Risk of water damage.
*INSTALLATION* Installation Direct connection to a sink drain outlet Use the hose holder, the hose clips and the non-return valve (available to purchase). Fit the adapter 1 to the sink drain outlet using the nut 2. The nut is usually fitted with a washer which must be removed. Attach the end of the hose 4 to the adapter 1. Use the hose holder. Use a screwdriver to tighten the hose clip 3 up close to the nut. Fit the non-return valve 5 to the tumble dryer drain hose 6.
*INSTALLATION* Installation Electrical connection The tumble dryer is supplied with a mains cable with moulded plug ready for connection to a socket. The socket must be easily accessible after the tumble dryer has been installed. If the switch is not accessible after installation an additional means of disconnection must be provided for all poles. Risk of fire from overheating. solar power. When the tumble dryer is switched on, power surges could result in a safety switch-off.
Technical data Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 820 mm (+8/-2 mm) Width for building under 600 mm Depth for building under 600 mm Suitable for pushing under a worktop Yes Stackable Yes Weight Approx. 62 kg Drum volume 120 l Load capacity 7.0 kg (weight of dry laundry) Capacity of condensed water container 4.8 l Hose length 1.49 m Maximum delivery head 1.00 m Maximum drain hose length 4.
Consumption data Load Cottons Cottons Normal 1 Final spin speed in a Residual domestic washing moisture machine Energy Duration kg rpm % kWh min. 7.0 1,000 60 1.70 155 3.5 1,000 60 0.96 95 7.0 1,200 53 1.50 140 7.0 1,400 50 1.45 133 7.0 1,600 44 1.30 118 Cottons Normal incl. Gentle tumble 7.0 1,000 60 1.75 165 Cottons Hand iron 7.0 1,000 60 1.25 120 7.0 1,200 53 1.10 105 7.0 1,400 50 1.00 98 7.0 1,600 44 0.85 83 Minimum iron Normal 4.
Programmable functions Programming You can use the programmable functions to alter the dryer's electronics to suit your requirements. Programming is carried out by following these steps (, , ... ) using the sensors. Accessing the programming level Before you begin, ensure the following: - Make sure that the programme selector is turned to any of the programme settings. Choosing and selecting programmable functions The number of the programmable function will appear in the display as and a number: e.
Programmable functions Editing and saving the programmable function The number of the programmable function, e.g. will light up again. You can either switch a programmable function on or off or select different options. Exiting the programming level The programmable function option will appear in the time display as and a number: e.g. . Turn the programme selector to the position. The settings have been changed. You can alter the settings again at any time.
Programmable functions Cottons drying levels You can adjust the drying levels for the Cottons programme to one of 7 different levels. Options = even damper Cooling temperature The laundry will be cooled to 55 °C before the end of the programme. It can be cooled to a lower temperature, but this will prolong the cooling phase. The level is set in increments of 1 °C.
Programmable functions PIN Code The code prevents your machine being used without your knowledge. When the code has been activated, you have to enter the code after switching the dryer on. Otherwise the dryer cannot be operated. Options = Off (factory setting) = On If option has been selected, after switching on you will have to enter the code before you can operate the dryer. Using the dryer when the code is activated After the dryer is switched on, will flash in the time display.
Programmable functions Control panel standby status To save energy, the time display and the sensors will go out once the programme has been running for 10 minutes. In this case, the Start/Add laundry sensor flashes slowly. However, there is no switch-off in the event of a fault. Options = Off The time display and the sensors do not go out. = On (factory setting) The time display and the sensors will go out once the programme has been running for 10 minutes.
Programmable functions Airways indicator Fluff must be removed after every drying programme. In addition, this indicator will remind you to clean the filters when a certain amount of fluff has collected in them: You can decide at what level of fluff this reminder should be given. You will have an idea of how often this should be done after a few drying programmes. Options = Off does not light up.
Miele Australia Pty. Ltd.
TCB 140 WP en-AU, NZ M.-Nr.