User Manual
Table Of Contents
- Contents
- Caring for the environment
- Warnings and safety instructions
- Operating the tumble dryer
- Before using for the first time
- Energy saving tips
- 1. Notes on correct laundry care
- 2. Loading the tumble dryer
- 3. Selecting a programme and starting it
- 4. Removing the laundry at the end of the programme
- Programme chart
- Changing the programme sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Problem solving guide
- Service
- Installation
- Technical data
- Consumption data
- Programmable functions
Problem solving guide
48
Problem Possible cause and remedy
flashes/lights up
after the tumble dryer is
switched on and a
programme cannot be
selected.
Access via a code has been activated.
See “Programmable functions - PIN Code”.
and another number
combination flash after
a programme has been
cancelled, a signal
sounds.
There is no obvious cause.
Switch the dryer off and then on again.
Start a programme.
If the programme terminates again with the same
error message, then there is a fault. Contact Miele.
: lights up and the
programme has been
cancelled, a signal
sounds.
The laundry is unevenly distributed or has rolled up.
Untangle the laundry and remove a few items, if
necessary.
Switch the dryer off and then on again.
Start a programme.