Operation Manual

What to do if...

With the help of the following notes minor faults in the performance of the appli-

ance, some of which may result from incorrect operation, can be put right without

contacting the Service Department.

 Repair work to electrical appliances must only be carried out by a suitably

qualified person in strict accordance with current local and national safety regu-

lations. Repairs and other work by unqualified persons could be dangerous. The

manufacturer cannot be held liable for unauthorised work.

Check indicators and fault messages

Problem Cause and remedy

The programme is can-

celled,  lights up

This is not a fault.

In some programmes, if the drum has been under-

loaded or is empty, the programme will be cancelled.

This can also happen if the items are already dry.

 Open and close the door to resume drying.

 Dry individual items using the Warm air timed dry-

ing programme.

 flashes/lights up

after the tumble dryer

has been switched on

and a programme can-

not be selected

Access via a code has been activated.

 See "Programmable functions -  Code".

 and  (e.g. )

light up after a pro-

gramme has been can-

celled

No obvious cause.

 Switch the dryer off and then on again.

 Start a programme.

If the programme is cancelled again and an error

message appears, there is a fault. Contact the Miele

Service Department.