User manual

20
Attaching the mounting plate
2plugs and 2T20 TORX screws are
supplied for attaching the mounting
plate to the wall.
You will also need a battery-operated
screwdriver or a drill (with a drilling dia-
meter of 6mm).
Depending on how your vacuum
cleaner is configured, select a distance
of 45cm or 98cm between the bottom
edge of the mounting plate and the
floor.
Be careful not to damage any cables
laid in the wall.
 Attach the mounting plate to the wall.
Connecting the accessories holder
(if required)
An accessories holder is supplied for
storing the three-piece accessory set
(see “Using the accessories supplied”).
 Push the accessories holder on to the
wall bracket as far as it will go.