User manual

21
Connecting the wall bracket
 Slide the wall bracket down into the
mounting plate from above until it
audibly clicks into place.
 Slide the PowerUnit of the fully as-
sembled vacuum cleaner, with the
battery inserted, down into the wall
bracket from above.
 Plug the supplied charging cable into
the charging socket on the bottom of
the battery.
 Plug the charger into the power
socket.
The charging process will start.
Battery charging state indicator
(while charging)
The battery charging state is displayed
on the PowerUnit.
Charging capa-
city
Display
Approx.0–34% Bottom light
flashes slowly
Approx.35–69% Bottom light is lit
up; middle light
flashes slowly
Approx.70–90% Bottom and
middle lights are
lit up;
top light flashes
slowly
Approx.91–
100%
Bottom, middle
and top lights are
lit up
Once the battery is fully charged, the
battery charging state indicator
switches off after 10minutes to con-
serve energy.