User manual

27
Cleaning the fine dust filter
The fine dust filter is located in the dust
container.
Clean the fine dust filter at least once a
month.
 Remove the dust container.
 Lift the fine dust filter upwards to re-
move it.
 Risk of damage caused by incor-
rect cleaning.
The fine dust filter can become dam-
aged and be less effective as a res-
ult.
Do not clean the inside of the fine
dust filter. Do not use pointed or
sharp-edged objects to clean the fil-
ter. Do not brush the fine dust filter.
 Hold the fine dust filter over a bin.
 Carefully knock the fine dust filter
with the rubberised lower edge.
 Turn the fine dust filter slightly while
you do this to free the dirt from all of
the crevices.
 Once it is clean, replace the fine dust
filter in its position in the dust con-
tainer.
 Replace the dust container on the
PowerUnit connector.
Cleaning the pre-filter
The pre-filter is located in the dust con-
tainer.
Clean the pre-filter when required.
 Remove the dust container.
 Remove the fine dust filter.
 Empty the dust container over a bin
and lift the pre-filter upwards to re-
move it.