User manual

29
Cleaning the dust container
Clean the dust container as required.
 Remove the dust container.
 Empty the dust container over a bin
and lift the pre-filter upwards to re-
move it.
 Clean the dust container using water
and mild washing-up liquid.
 Dry the dust container thoroughly.
 Replace the pre-filter in the dust con-
tainer.
 Replace the dust container on the
PowerUnit connector.
Cleaning the Electrobrush/handheld
brush
(The availability of the handheld brush
depends on the model)
 Separate the Electrobrush/handheld
brush from the vacuum cleaner con-
nector.
Removing threads and hairs
 Place the Electrobrush/handheld
brush upside down on a level, clean
surface.
 Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors. To guide
the scissors, move along the guide
track on the roller brush.
Then run the vacuum cleaner to va-
cuum up the cut threads and hairs.