User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- -
- Installation and connection
- Assembling the vacuum cleaner
- Connecting the Comfort handle
- Connecting the PowerUnit and the suction tube
- Inserting the battery
- Connecting the Electrobrush
- General battery information
- Charging the battery (without wall mounting)
- Charging the battery (with wall mounting)
- Wall mounting
- Attaching the mounting plate
- Connecting the accessories holder (if required)
- Connecting the wall bracket
- Battery charging state indicator (while charging)
- Battery charging state indicator (while in use)
- Using the accessories supplied
- Use
- Maintenance
- Problem solving guide
- Error messages
- Cleaning and care
- Service
- Optional accessories
- Purchasing accessories
- SEB 23 Electro Compact handheld brush (HX SEB)
- Dusting brush with natural bristles (SSP 10)
- Radiator brush (SHB 30)
- Mattress nozzle (SMD 10)
- Crevice nozzle, 300 mm (SFD 10)
- Crevice nozzle, 560 mm (SFD 20)
- Upholstery nozzle, 190 mm (SPD 10)
- Additional AP01 battery (HX LA)
- LS03 charger cradle (HX LS)
- Electrical connection for the UK
- Installation and connection
- Leere Seite
- Leere Seite
- Leere Seite
Warning and Safety instructions
6
Technical safety
The vacuum cleaner operates at 25.2V.
It is classified as a class III appliance.
This appliance is supplied by a safety extra-low voltage (SELV)
power source where the voltage is low enough to protect users from
the risk of electrical shock. A Class II charger is used for supplying
power to charge the vacuum cleaner.
Before using the vacuum cleaner and its accessories, check for
any visible signs of damage. Do not use a damaged appliance.
Compare the connection data on the data plate of the charger
(voltage and frequency) with that of the mains electricity supply. This
data must match exactly. Without modifications, the charger is suit-
able for 50Hz and 60Hz.
The mains electrical plug must be fitted with an appropriate fuse.
The MieleMultiFloorXXLElectrobrush and the MieleElec-
troCompacthandheldbrush (varies according to the model) are ad-
ditional motor-driven devices designed specially for this Miele va-
cuum cleaner. For safety reasons, the vacuum cleaner must not be
used with a different MieleElectrobrush/handheld brush or an Elec-
trobrush/handheld brush produced by another manufacturer.
Store the vacuum cleaner at an ambient temperature between
0°C and 45°C.
While the vacuum cleaner is under warranty, repairs should only
be undertaken by a Miele authorised service technician. Otherwise
the warranty will be invalidated.
Repairs should only be carried out by a Miele authorised service
technician. Repairs and other work by unqualified persons can cause
considerable danger to users.