User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- -
- Installation and connection
- Assembling the vacuum cleaner
- Connecting the Comfort handle
- Connecting the PowerUnit and the suction tube
- Inserting the battery
- Connecting the Electrobrush
- General battery information
- Charging the battery (without wall mounting)
- Charging the battery (with wall mounting)
- Wall mounting
- Attaching the mounting plate
- Connecting the accessories holder (if required)
- Connecting the wall bracket
- Battery charging state indicator (while charging)
- Battery charging state indicator (while in use)
- Using the accessories supplied
- Use
- Maintenance
- Problem solving guide
- Error messages
- Cleaning and care
- Service
- Optional accessories
- Purchasing accessories
- SEB 23 Electro Compact handheld brush (HX SEB)
- Dusting brush with natural bristles (SSP 10)
- Radiator brush (SHB 30)
- Mattress nozzle (SMD 10)
- Crevice nozzle, 300 mm (SFD 10)
- Crevice nozzle, 560 mm (SFD 20)
- Upholstery nozzle, 190 mm (SPD 10)
- Additional AP01 battery (HX LA)
- LS03 charger cradle (HX LS)
- Electrical connection for the UK
- Installation and connection
- Leere Seite
- Leere Seite
- Leere Seite
Warning and Safety instructions
7
Miele can only guarantee the safety of the appliance when genu-
ine Miele replacement parts are used. Faulty components must only
be replaced with genuine Miele replacement parts.
Cleaning
Do not immerse the vacuum cleaner or any accessories supplied
with it in water.
The Electrobrush/handheld brush (depending on the model), the
PowerUnit, the suction tube, the body and the Comfort handle con-
tain electrical wires. The plug connectors must not come into con-
tact with water. Danger of electric shock. They should only be
cleaned with a dry cloth.
Clean the vacuum cleaner and accessories only with a dry or
slightly damp cloth when disconnected from the power supply. Ex-
ception:
- Dust container: empty the dust container and remove the pre-fil-
ter. Clean the dust container using water and mild washing-up li-
quid only. Then dry the dust container carefully. Replace the pre-
filter in the dust container.
Correct use
Do not use the vacuum cleaner without the dust container, pre-fil-
ter, fine dust filter and motor protection filter fitted.
Do not vacuum up anything which has been burning or is still
glowing e.g. cigarettes, ashes or coal, whether glowing or apparently
extinguished.
Do not use the vacuum cleaner to vacuum up any water, liquid or
damp dirt. Wait until any freshly cleaned or shampooed rugs or car-
pets are completely dry before attempting to vacuum.
Do not use the vacuum cleaner to vacuum toner dust. Toner, such
as that used in printers and photocopiers, can conduct electricity.