Operating instructions/Installation instructions

en - IMPORTANT SAFETY INSTRUCTIONS
7
Before using the vacuum cleaner and its accessories,
check for any visible signs of damage. Do not use a dam-
aged appliance.
Compare the connection data on the data plate of the
charger (voltage and frequency) with that of the electricity
supply. This data must match exactly. Without modifica-
tions, the charger is suitable for 50Hz and 60Hz.
The electrical outlet must be rated at 15Amps.
The Miele Multi Floor XXL Electrobrush and the Miele
Electro Compact handheld brush (varies according to the
model) are additional motor-driven devices designed spe-
cially for this Miele vacuum cleaner. For safety reasons, the
vacuum cleaner must not be used with a different
MieleElectrobrush/handheld brush or an electrobrush/
handheld brush produced by another manufacturer.
Before and during use, make sure that no coarse dirt or
debris is/gets trapped in the bottom of the Electrobrush/
handheld brush (depending on model).
Repairs should only be performed by an authorized ser-
vice agent in accordance with national and local safety
regulations. Unauthorized repairs could cause injury or ma-
chine damage. Otherwise the warranty may be void.
Repairs should only be carried out by a Miele-authorized
service technician. Repairs and other work by unqualified
persons can cause considerable danger to users.