User manual

23
Connecting the wall bracket
 Slide the wall bracket down into the
mounting plate from above until it
audibly clicks into place.
 Slide the PowerUnit of the fully as-
sembled vacuum cleaner, with the
battery inserted, down into the wall
bracket from above.
 Plug the supplied charging cable into
the charging socket on the bottom of
the battery.
 Plug the charger into the power
socket.
The charging process will start.
Battery charging state indicator
(while charging)
The battery charging state is displayed
on the PowerUnit.
Charging capacity Display
Approx.0–34% Bottom light
flashes slowly
Approx.35–69% Bottom light is
lit up; middle
light flashes
slowly
Approx.70–90% Bottom and
middle lights are
lit up; top light
flashes slowly
Approx.91–99%
100%
Bottom, middle
and top lights
are lit up
Switches off
Once the battery is fully charged, the
battery charging state indicator
switches off to conserve energy.