User manual

31
 Replace the pre-filter in the dust con-
tainer.
 To do this, line up the guide lines on
the two sections and turn the dust
container lid back to its original posi-
tion.
 Close the cover at the bottom of the
dust container, making sure it clicks
into place.
 Replace the fine dust filter.
 Replace the dust container on the
PowerUnit connector.
Cleaning the dust container
Clean the dust container as required.
 Remove the dust container.
 Empty the dust container over a bin
and lift the pre-filter upwards to re-
move it.
 Clean the dust container using water
and mild washing-up liquid.
 Dry the dust container thoroughly.
 Reinsert the pre-filter in the dust con-
tainer and turn the pre-filter back to
its original position.
 Reattach the dust container to the
PowerUnit connector.
Cleaning the Electrobrush/handheld
brush (depending on model)
 Disconnect the Electrobrush/hand-
held brush from the vacuum cleaner.
 Place the Electrobrush/handheld
brush upside down on a level, clean
surface.