User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Caring for the environment
- -
- Installation and connection
- Assembling the vacuum cleaner
- Using the PowerUnit solo
- Connecting the Comfort handle
- Connecting the PowerUnit and the suction tube
- Inserting the battery
- Connecting the Electrobrush
- General battery information
- Charging the battery (without wall mounting)
- Charging the battery (with wall mounting)
- Wall mounting
- Attaching the mounting plate
- Connecting the accessories holder (if required)
- Connecting the wall bracket
- Battery charging state indicator (while charging)
- Battery charging state indicator (while in use)
- Using the supplied accessories
- Use
- Maintenance
- Error messages
- Problem solving guide
- Cleaning and care
- Service
- Optional accessories
- Electrical connection for the UK
- Installation and connection
35
Problem Cause and remedy
The vacuum cleaner
does not start when it is
switched on.
There is no battery inserted or the battery has been
inserted incorrectly.
Insert the battery or check how the battery is posi-
tioned (see “Installation and connection – Inserting
the battery”).
The rechargeable battery is not sufficiently charged.
Charge the battery exactly as described in these
operating instructions (see “Installation and con-
nection – General battery information” and “Char-
ging the battery”).
An original Miele battery has not been inserted.
Insert an original MieleAP01lithium-ionre-
chargeablebattery (HXLA).
The battery was not placed in the PowerUnit when
charging it for the first time.
To activate the battery, it must be placed in the
PowerUnit the first time it is charged (see “Installa-
tion and connection – General battery information”
and “Charging the battery”).
The charger is still plugged in.
Pull the plug out of the charging socket on the bot-
tom of the battery.