manual and_installation_instructions

Programmable functions
70
Programming
You can use the programmable
functions to alter the dryer's
electronics to suit your requirements.
Programming is carried out in these
steps (, ,  ... ) using the sensor
buttons.
Accessing the programming level
Before you begin, ensure the following:
- The dryer is switched on and any
program is selected.
- The door of the dryer is open.
 Touch the Start/Stop sensor button
and hold it down during steps -.
 Close the dryer door.
 Wait until the Start/Stop sensor
button, which will now be flashing
quickly, lights up constantly ...
 ... and then release the Start/Stop
sensor button.
 will light up on the time display.
Choosing and selecting
programmable functions
The number of the programmable
function will appear on the display as
 and a number:
e.g., .
 Touch the  or  sensor button to
scroll to the next or previous
programmable function:
Programmable function
 Drying levels “Normal”
 Drying levels “Wrinkle-free”
 Buzzer volume
 Keypad tone
 Code
 Conductivity
 Display switch-off status
 Appliance switch-off
 Memory
 Anti-crease
 Buzzer on
 Airway indicator
 Display brightness dimmed
 Confirm the selected programmable
function by touching the Start/Stop
sensor button.