User Guide and Installation Instruction

Energy saving tips
18
This dryer is designed for energy-
saving drying cycles thanks to its heat
pump technology. However, you can
save a little more energy with the
following measures as the drying time
is not extended unnecessarily.
– Make sure your laundry is spun at the
maximum spin speed before drying.
The higher the spin speed, the
greater the savings that can be made
in energy and time during drying,
e.g., approx. 20% energy can be
saved if spun at 1600rpm instead of
1000rpm.
– Load according to the optimum
amount of laundry recommended for
the program being used. This will
mean that the energy consumption
for the amount of laundry is at its
most economical.
– Make sure that the room temperature
is not too high. If there are other heat
producing appliances in the room in
which the dryer is located, make sure
the room is well ventilated and switch
the other appliances off, if possible.
– Clean the lint filters in the door
opening after every drying cycle.