User Guide and Installation Instruction
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance capsule
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Settings
Initial set-up
21
Setting up Miele@home
Your tumble dryer is equipped with an
integrated WiFi module. The dryer can
be connected to the household WiFi
network.
You will then be able to operate the
dryer via the Miele@mobile app.
The following message appears in the
display:
Miele@home
Touch the OK sensor button.
OK
Set up now
Confirm the message by touching the
OKsensor button.
You can also start up the Miele@home
app at a later time.
Touch the sensor button until the
following appears in the display: Set
up later. Confirm the message with the
OK sensor button.
Select the required connection type
from the display.
1. Connect via WPS
2. Connect via App
Before installing the dryer in its final
location, ensure the signal strength is
sufficient for your WiFi network.
Miele@mobile App
The Miele@mobile App is available to
download free of charge from the Apple
App Store
®
or from the Google Play
Store™.
Connecting with WPS
Your WiFi router must support WPS
(WiFi Protected Setup).
Follow the instructions in the display.
If the connection fails, you have
probably not connected WPS to your
router quickly enough. Repeat the steps
above.
Tip: If your WiFi router does not support
WPS, please connect via the
Miele@mobile app.