User Guide and Installation Instruction

6. Program end – removing the laundry
32
Program end
The program is finished when End/Anti-
Crease or End appears in the display.
The Start/Stop button light goes out.
The dryer will switch off automatically
15minutes after the end of the Anti-
crease phase (with programs without an
Anti-crease phase it will switch off
15minutes after the end of the
program).
Removing the laundry
 Never open the door before the
drying process has finished.
 Pull the door open at the side with
the orange marker.
 Remove the laundry.
Check that all items have been
removed from the drum.
If items are left in the dryer, they
could be damaged by overdrying
when the dryer is next used.
 Turn the program selector to .
A signal sounds as long as the dryer
does not switch off automatically.
 Remove the lint from the 2 lint filters
in the door opening: see the
"Cleaning and care – Lint filters".
 You must remove the fragrance
capsule (if present) beforehand. See
"Fragrance capsule".
 Shut the door with a gentle swing.
 Empty the condensed water
container, if used.
Drum lighting
The inside of the drum lights up so that
you don't forget any items of laundry
when you empty it.
The drum lighting switches off
automatically (energy saving).