User Guide and Installation Instruction

Changing the program sequence
41
You cannot change to another program
once a program has started (this
prevents unintentional alterations).
If you try to change a program, 
Change not possible lights up until the
original program is reset.
Exception: The dryer is switched off by
turning the program selector to the 
position.
You will need to cancel the current
program before you can select a new
one.
Canceling a program
 Touch the Start/Stop sensor button.
Cancel Program lights up.
 Confirm with the OK sensor button.
End/Cooling down will light up in the
display, depending on the drying
duration and the drying temperature
reached.
If Program Canceled appears:
 Turn the program selector to .
If you would like to select
another program
You can also directly cancel a running
drying program if you immediately
select another program and start it.
 Turn the program selector to .
 Turn the program selector to another
program.
 Touch the Start/Stop sensor button.
Adding or removing laundry
Bear in mind that hot steam can
escape after the door is opened.
 Pull open the door.
 Add or remove items.
 Close the door.
 Touch the Start/Stop sensor button.
The program starts.
Program duration
Altering the program sequence can
cause the program duration shown in
the display to be adjusted.