User Guide and Installation Instruction
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance capsule
- Cleaning and care
- Frequently Asked Questions
- Technical Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation and connection
- Technical data
- Settings
Condensed water container
42
Emptying the condensed water
container
The condensed water is collected in
the condensed water container.
Empty the condensed water
container after every drying program.
The Empty container See indicator will
light up if the maximum level of the
condensed water container is reached.
To turn the indicator light off: open and
close the door while the dryer is
switched on.
Remove the condensed water
container.
To prevent water running out, keep it
in a horizontal position when carrying
it. Hold it at the front and towards the
back.
Empty the condensed water
container.
Replace the condensed water
container in the dryer.
Do not drink condensed water. It
can cause health problems in people
and animals.
The condensed water can be used for
the Soft Steam program. The
condensed water container must be
filled to use this program (see the
following section).