Operating Instructions Heat-Pump Dryer It is essential to read these operating instructions before installing, starting up, and using the appliance. This prevents both personal injury and damage to the appliance. en-US M.-Nr.
Contents Caring for the environment ............................................................................. 6 IMPORTANT SAFETY INSTRUCTIONS ............................................................ 7 Operating the tumble dryer .............................................................................. Control panel ....................................................................................................... How the program selector works ............................................
Contents Program chart.................................................................................................... 32 Changing the program sequence .................................................................... 36 Changing a program once it has started............................................................. 36 Adding or removing laundry ................................................................................ 36 Condensed water container ............................................
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 61 Installation.......................................................................................................... Front view ............................................................................................................ Rear view............................................................................................................. Transporting the tumble dryer .....................
Contents Programmable functions .................................................................................. Programming ....................................................................................................... Drying levels “Normal” .................................................................................. Drying levels “Wrinkle-free”.......................................................................... Buzzer volume...............................................
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: WARNING This tumble dryer is intended for use in domestic households and similar working and residential environments. It is essential to read all instructions before using the appliance. Do not allow children to play on or in the appliance. Close supervision is necessary when the appliance is used near children.
IMPORTANT SAFETY INSTRUCTIONS Important information regarding use of fabric softener sheets: We do not recommend use of fabric softener sheets. Use of fabric softener sheets can clog the surfaces of the lint filters, extending the drying time and increasing energy consumption. During subsequent cleaning, the plastic and surfaces of the lint filters can be damaged! The best results are obtained by using liquid fabric softener in the washing machine. Follow the manufacturer's instructions.
IMPORTANT SAFETY INSTRUCTIONS To prevent the risk of fire, the following textiles must not be dried in this dryer: - items which have not been washed. - items, such as work-wear, exposed to grease, oils, or other deposits (such as lotions or cosmetics) in your dryer. If these items have not been thoroughly cleaned there is a danger that they may contribute to a chemical reaction that could cause the laundry to ignite when heated even after being removed from the dryer.
IMPORTANT SAFETY INSTRUCTIONS Allow the dryer to complete each stage of the program selected, including the cooling down phase. This will ensure that the items being removed are not too hot to handle. Clean the lint filter before or after each load. Keep the area around the air intake (toe kick) and adjacent surrounding areas free from lint, dust and dirt. The interior of the machine should be cleaned periodically by qualified personnel. GROUNDING INSTRUCTIONS This appliance must be grounded.
IMPORTANT SAFETY INSTRUCTIONS Do not modify the plug provided with the appliance: if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Before installation, disconnect the tumble dryer from the electrical supply by shutting off the power main, unplugging the power cord or tripping the circuit breaker. Do not restore power until the installation is complete. Miele tumble dryers and Miele washing machines can be installed as a washer-dryer stack.
IMPORTANT SAFETY INSTRUCTIONS Heat-pump technology and refrigerant: The heat pump in this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temperature level and liquified by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place. - The humming noises caused by the heat pump during the drying process are normal.
IMPORTANT SAFETY INSTRUCTIONS Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. Store the fragrance flacon in its original packaging. Caution: The fragrance can leak out of the flacon! Make sure that you always keep the flacon, or the lint filter with the flacon inserted in it, in a horizontal position when carrying and do not tip or place it down on any surface.
IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity This appliance complies with Part 15 of the FCC regulations. This appliance has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and is subject to the following conditions: This appliance does not cause harmful interference. The appliances may be interconnected as desired.
Operating the tumble dryer Control panel a Control field b Sensor buttons for the drying levels c Indicator lights light up when necessary d Gentle sensor button for gentle drying f Sensor buttons for the time selection g Start/Add laundry sensor button for program start and adding laundry h Optical interface for service technicians i Program selector e Time display for the program duration 15
Operating the tumble dryer How the program selector works How the control field works The program selector is used to select programs. The tumble dryer is switched on when you select a program and switched off by turning the program selector to the position. MobileStart You can operate your tumble dryer remotely with the Miele@mobile app. The , , , and sensor buttons react to fingertip contact. Selection is possible as long as the respective sensor button is lit.
Operating the tumble dryer Indicator lights Time display - lights up when the condensed water container needs to be emptied. The remaining program duration will be displayed in hours and minutes. - lights up when the plinth filter needs to be cleaned. - PerfectDry The PerfectDry system measures the residual moisture present in the laundry in programs with selectable drying levels and provides a more precise drying result. With most programs, the duration displayed may vary or “jump”.
Energy-saving tips This dryer with heat-pump technology is designed for energy-saving drying cycles. However, you can save a little more energy with the following measures as the drying time is not extended unnecessarily. - Make sure your laundry is spun at the maximum spin speed in the washing machine before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying, e.g., approx. 20% energy can be saved if spun at 1,600 rpm instead of 1,000 rpm.
Functioning of the heat-pump dryer Two separate circuits ensure that the laundry is dried: Dry air circuit The drying air flows through a heat exchanger, the drum, and several filters. This is ensured by a blower in the dryer. - The drying air flows through the heat exchanger in the longitudinal direction and is heated in the rear area. - The drying air is then blown into the drum, where it absorbs the moisture of the laundry.
Initial set-up Miele@home Your tumble dryer is equipped with an integrated WiFi module. To use this feature, you will need: - a WiFi network - the Miele@mobile app - a Miele user account You can create a user account via the Miele@mobile app. The Miele@mobile app will guide you as you connect your tumble dryer to your home WiFi network.
Initial set-up Downtime after installation Setting up Miele@home Damage caused by switching the There are 2 ways of connecting: appliance on too soon. This can damage the heat pump. After setting up the tumble dryer, wait for at least one hour before starting a drying program. 1. via the Miele@mobile app (default) 2. via WPS To do so, you will need a WPScompatible router.
Initial set-up Logging in via WPS Turn the program selector to MobileStart . Touch the sensor button until appears on the time display and a short keypad tone sounds. The timeout then starts to count down from 2 minutes on the time display. Activate the WPS function on your router within 2 minutes. When you have successfully connected, will appear on the time display. Tip: If the connection has not been set up when the timeout has finished counting down, repeat the process.
1. Notes on correct laundry care Points to note regarding washed laundry - When washing very heavily soiled items, ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times. - Do not load the drum with items that are still soaking wet. Make sure your laundry is spun at the maximum spin speed before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying.
1. Notes on correct laundry care Drying Tip: See the “Program chart”. This describes the programs and gives their maximum load. - Always observe the maximum recommended load for each program. This will mean that the energy consumption for the amount of laundry is at its most economical. - Down-filled garments have linings which have a tendency to shrink, depending on the quality of the item. Only use the Woolens Handcare program for these items.
2. Loading the tumble dryer Loading the laundry Textiles may be damaged. Before loading, read “1. Notes on correct laundry care”. Unfold the laundry and load loosely into the drum. Socket for the fragrance flacon The “Fragrance flacon” chapter describes how to use the fragrance flacon. If you are not using a fragrance flacon: Push the tab down completely (see arrow) so that the socket is closed. Otherwise, lint will accumulate here. Closing the door Do not overload the drum.
3. Selecting a program and starting it Switching on the tumble dryer The tumble dryer is switched on when you select a program and switched off by turning the program selector to the position. Turn the program selector to a program. Selecting a program There are 2 possible ways to select a program: 1. Selecting drying programs using the program selector Turn the program selector to the required program. A drying level may light up and durations will appear on the time display. 2.
3. Selecting a program and starting it Selecting the drying level for programs with a selectable drying level Normal, Delicates, Bed Linens, Dress Shirts, Denims, Smoothing, Express, Outdoor The preset drying level can be changed if required. Time-controlled and other programs Time Dry/DryFresh You can set the duration in ten-minute increments from minutes to hours. Touch the sensor button for the drying level you want. It will then light up brightly.
3. Selecting a program and starting it Selecting Gentle Delicate fabrics (with the symbol on the care label, e.g., acrylic garments) are dried at a lower temperature and the program duration is longer. Touch the Gentle sensor button. It then lights up brightly. - Gentle can be selected with the following programs: – Normal – Dress Shirts - This dryer measures residual moisture content in the laundry to ensure perfect drying results.
4. Removing the laundry at the end of the program End of program/Anti-crease End of program: lights up in the time display and the Start/Add laundry sensor control goes out. An audible signal (buzzer) sounds. Items left in the dryer could be damaged by over-drying when the dryer is used the next time. Always remove all items from the drum. The end of the program is followed by the Anti-crease phase, which will run for up to 2 hours.
Delay Start/SmartStart Altering Delay Start Selecting Delay Start You can delay the start of a program from minutes up to hours. However: Delay Start cannot be used with the Time Dry/DryFresh program. Touch the sensor button. will light up brightly. Touch the or sensor button repeatedly until the required delayed start time appears on the time display. Tip: The times will count upwards and downwards automatically if you keep your finger on the or sensor button.
Delay Start/SmartStart SmartStart The SmartStart function lets you define a time period during which your dryer will start automatically. The start takes place via a signal, e.g., from your energy supplier, that indicates that the electricity tariff is particularly economical. This function is active when the SmartGrid programmable function is activated The time period can be defined between 30 minutes and 24 hours. During this period, the dryer waits for the signal from the energy supplier.
Program chart All weights marked with * are based on the weight of dry laundry. Normal Full load (17.6 lb/8 kg)* Extra, Normal** Items Single and multi-layered cotton items. For example, T-shirts, underwear, baby clothes, workwear, jackets, covers, aprons, overalls, hand towels, bath towels, bathrobes, and bed linen. Tip - Select Extra for multi-layered and very thick fabrics. - Do not use Extra for jersey fabrics (e.g., T-shirts, underwear, baby clothes) because they can shrink.
Program chart Woolens/Silks Items Small load (4.4 lb/2 kg)* - For woolen garments and fabric containing wool blends. For example, pullovers, knitted jackets, and pantyhose. - Silk garments which are suitable for tumble drying, e.g., blouses and shirts. Tip - Woolen garments are loosened and fluffed up in a short amount of time. - The program reduces the amount of creases in silk garments that are suitable for tumble drying. - The items are not dried completely in this program.
Program chart Express Half load (8.8 lb/4 kg)* Extra, Normal, Hand iron, Rotary iron Items Suitable for resistant garments for the Normal program. Note The program duration is shortened. Outdoor Small load (5.5 lb/2.5 kg)* Normal, Hand iron Items Outdoor clothing which is suitable for drying in a tumble dryer. Proofing Small load (5.5 lb/2.
Program chart Time Dry/DryFresh Note Full load (17.6 lb/8 kg)* - For airing or drying textiles (Time Dry) 1 - For freshening up textiles (DryFresh) - Do not select the longest drying time to start with. Check the items as you are drying them to find the optimum time. Items - Airing: multi-layered textiles whose layers have different drying characteristics, e.g., jackets, pillows, sleeping bags, and other voluminous items - Drying: individual items, e.g.
Changing the program sequence Changing a program once it has started It is no longer possible to change the selected program. This prevents the appliance being operated unintentionally. If you adjust the program selector, the symbol will light up in the display. The symbol goes out when you select the original program. Adding or removing laundry You have forgotten an item of laundry, but the program has already started. Touch the Start/Add laundry sensor button.
Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying program. The indicator light will light up if the maximum level of the condensed water container is reached. To turn the indicator light off: Open and close the door while the dryer is switched on. Empty the condensed water container. Replace the condensed water container in the dryer.
Fragrance flacon FragranceDos Fragrance flacons (optional accessories) can be used to give your laundry a pleasant scent. Tip: You can simply close the fragrance flacon if you want to dry textiles without adding fragrance. Removing the protective seal from the fragrance flacon Only hold the fragrance flacon as illustrated. Do not hold it at an angle or tip it as the fragrance will leak out of the flacon. Risk of fire and damage to the health if fragrance flacons are used incorrectly.
Fragrance flacon Inserting the fragrance flacon Open the door of the tumble dryer. The fragrance flacon is inserted in the upper lint filter next to the recessed grip. Markers and must line up with one another. Open the cover using the tab until the tab is right at the top as shown. Turn the outer ring clockwise a little. The fragrance flacon can slip out. Turn the outer ring in such a way that markers and line up. Insert the fragrance flacon into the socket as far as it will go.
Fragrance flacon Opening the fragrance flacon Before drying, you can select the intensity of the fragrance. Turn the outer ring clockwise: The further you open the fragrance flacon, the more intense the fragrance. 40 Damp laundry and longer drying durations with sufficient heat transfer are needed for the fragrance to be released into the laundry effectively. The fragrance will also be noticeable in the room air during the process.
Fragrance flacon Closing the fragrance flacon After drying, the fragrance flacon should be closed to prevent the fragrance from escaping needlessly. Turn the outer ring counterclockwise until marker b is in position _. Replace the fragrance flacon with a new one when the intensity of the fragrance is no longer sufficient.
Fragrance flacon Removing/replacing the fragrance flacon Turn the outer ring counter-clockwise until markers a and b line up. Replace the fragrance flacon with a new one. When not in use, you can store the fragrance flacon in its original packaging. Fragrance flacons are available to order from Miele retailers or online. 42 The fragrance can leak out of the pod. Do not lay the fragrance flacon down.
Cleaning and care Lint filters This tumble dryer has 2 lint filters in the door opening: The upper and lower lint filters trap lint produced during the drying process. Clean the lint filters after each drying program. This prevents an extension of the program duration. Also clean the lint filters when the indicator light comes on. To turn the indicator light off: Pull the upper lint filter forward to remove it. Open and close the door while the dryer is switched on.
Cleaning and care Remove the lint (see arrows) from the filter surface of all the lint filters and the perforated laundry deflector. Push the upper lint filter back into position until it clicks. Close the door. Cleaning the lint filters and air flow openings thoroughly If the drying duration has become longer or the surface of the filters is visibly compacted with lint, you should carry out the following cleaning procedure. Remove the fragrance flacon. See “Fragrance flacon”.
Cleaning and care Ensure the filters are dry before replacing them. Wet filters could cause operational faults. Push the lower lint filter in completely and lock it with the yellow dial. Push the upper lint filter in completely. Close the door. Hold the dial and pull the lint filter forward to remove it. Use a vacuum cleaner with a long crevice nozzle attached to remove any visible lint from the upper air flow openings. Finally, clean the lint filters with water.
Cleaning and care Cleaning instructions when using fabric softener sheets If you are using fabric softener sheets, please follow these warnings and instructions. Option 3 Wet the surfaces of the lint filters with a liquid color detergent (e.g., Miele Ultra Color Liquid Laundry Detergent). Leave it on for approx. 2 hours. First, clean the filters as Risk of fire! described in “Cleaning the lint filters with water”.
Cleaning and care Cleaning the plinth filter Clean the plinth filter whenever the indicator light comes on or when the program duration is longer than usual. To turn the indicator light off: Open and close the door while the dryer is switched on. Removing the plinth filter Pull the plinth filter out by the handle. The right-hand guide pin comes out when the plinth filter is removed. The guide pin prevents the access panel from closing without the plinth filter.
Cleaning and care Cleaning the plinth filter Pull the handle out of the plinth filter. Clean the plinth filter thoroughly under running water. Install the plinth filter back on the handle. Make sure it is the correct way round. Squeeze the plinth filter very carefully several times as you rinse it. Rinse the plinth filter until all visible residues have been removed. Use a damp cloth to remove any lint from the handle. Damage caused by a damaged or worn plinth filter.
Cleaning and care Cleaning the plinth-filter access panel Cleaning the dryer Disconnect the tumble dryer from the electrical supply. Damage due to the use of unsuitable care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or allpurpose cleaners. Use a damp cloth to remove any lint. Make sure that you do not damage the rubber seal when doing this. Close the heat-exchanger access panel.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Indicator lights or information on the time display Problem Possible cause and solution The indicator light comes on at the end of the program. The tumble dryer is not working correctly or economically.
Frequently Asked Questions Problem Possible cause and solution and continue to flash after a program has been canceled, despite thorough cleaning. The plinth filter looks clean after thorough cleaning. However, the program terminates and the fault message appears again. It is likely that there is still underlying residue that could not be removed. Turn off : turn the tumble dryer off and then on again. Check for the possible causes described below. The heat exchanger is clogged.
Frequently Asked Questions Problem Possible cause and solution Lines flash and light up after turning on: . Program selection is not possible. Access via a PIN code has been activated. See “Programmable functions”, “ PIN code”. There is no obvious cause. Switch the dryer off and then on again. Start a program. and another number combination flash after a program has been cancelled, a signal sounds. : lights up and the program has been cancelled, a signal sounds.
Frequently Asked Questions Unsatisfactory drying results Problem Possible cause and solution The laundry is not suffi- The load consisted of different types of fabric. ciently dry. Finish drying using the Time Dry/DryFresh program. Select a more suitable program next time. Useful tip: you can alter the drying levels for some programs. See “Programmable functions“, sections “ Normal drying levels“ and “ Wrinkle-free drying levels”.
Frequently Asked Questions The drying cycle duration is very long Problem Possible cause and solution The drying process goes on too long or even switches off.* The room where the tumble dryer is located is too warm. Ventilate the room thoroughly. Detergent residues, hair, and fine lint can clog the filters. Clean the lint filters and the plinth filter.
Frequently Asked Questions Other problems Problem Possible cause and solution You can hear operating noises (buzzing/humming). This is not a fault. The compressor is operating. These noises are quite normal and can be heard when the compressor is operating. A program does not start. There is no obvious cause. Connect the power plug. Turn on the tumble dryer. Close the door. Check whether the fuse has tripped.
Frequently Asked Questions Replacing the plinth filter Deformation The heat exchanger can clog up. Replace the plinth filter immediately if you see the following signs of wear before or after cleaning (optional accessory). Poor fit Deformations indicate that the plinth filter has become worn. The edges of the plinth filter do not sit properly and the plinth filter is deformed. Lint will blow into the heat exchanger unfiltered through edges that do not sit properly.
Frequently Asked Questions Cracks, tears, indentations Lint will blow into the heat exchanger through cracks and tears. This will cause a permanent obstruction in the heat exchanger. White residues or residues of other colors Residues arise from laundry fibers and traces of detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crust.
Frequently Asked Questions Reactivating the plinth filter You can reactivate one or more dirty plinth filters in the washing machine. You will then be able to use the plinth filter again. Prior to reactivation, check that the plinth filter is in good order. Check the plinth filter following the instructions provided in “Frequently Asked Questions – Replacing the plinth filter”. Replace the plinth filter if it has worn out. Wash the plinth filter(s) separately, not with any laundry items.
Frequently Asked Questions Bottom right grille In general, the cooling fins behind the grille on the bottom right do not need cleaning. They should only be cleaned if the drying process is taking an exceptionally long time due to a very high level of dust or lint in the room in which the dryer is located. First open the panel for the plinth filter (bottom left). Danger of injury! Do not touch the cooling fins with your hands. You could cut yourself.
Customer Service Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
IMPORTANT SAFETY INSTRUCTIONS , WARNING - Risk of Fire To reduce the risk of severe injury or death, follow all installation instructions. Clothes dryer installation must be performed by a qualified installer. Install the clothes dryer according to the manufacturer's instructions and local codes. Repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty.
IMPORTANT SAFETY INSTRUCTIONS The installation of this unit in non stationary locations (e.g. ships) must be performed by a qualified installer or service agency, in strict accordance with national and local safety regulations and standards. Do not install the machine in rooms where temperatures below freezing may occur. This dryer is not intended for wall-insert. If there is any doubt concerning installation, contact Miele’s Service Department. USA 888-99-MIELE(64353) service@mieleusa.
*INSTALLATION* Installation Front view a Drain hose for condensed water b Power cord – Observe the section entitled “Electrical connection”.
*INSTALLATION* Installation Rear view a Protruding lid for holding when moving the tumble dryer (see arrows) b Drain hose for condensed water c Hook for winding the power cord during transport d Power cord Transporting the tumble dryer Danger of injury to people and damage to property caused by moving the appliance incorrectly. If the tumble dryer tips up, there is a danger of injury to people and damage to property. Ensure that the tumble dryer is stable during transportation.
*INSTALLATION* Installation Installation Leveling the tumble dryer Ensure that no closeable door, sliding door, or an oppositely hinged door is installed that would hinder the door of the dryer being opened in any way. Downtime after installation Damage caused by switching the appliance on too soon. This can damage the heat pump. After setting up the tumble dryer, wait for at least one hour before starting a drying program.
*INSTALLATION* Installation Before moving the tumble dryer again A small quantity of condensed water that remains in the area around the pump after the drying process can run out if the dryer is tilted. Recommendation: Start the Time Dry program for approx. 1 minute before transporting the dryer. Any remaining condensed water will then be fed into the condensed water container (which you will need to empty again) or out through the drain hose.
*INSTALLATION* Installation Installing the dryer in a floor-to-ceiling closet You can also insert a ventilation opening at the top of the closet. In addition, you must also provide an opening on the bottom side of the closet door. Direct ventilation is also possible via an air conditioning outlet in the closet. The air must be able to circulate freely at the top of the closet. The air supply must not be hindered by a shelf.
*INSTALLATION* Installation Product dimensions Dimensions 5.2 ft (1.6 m) drain hose, detachable, top right on the rear 6.
*INSTALLATION* Installation Electrical connection GROUNDING INSTRUCTIONS The electrical safety of this dryer can only be guaranteed when continuity is complete between it and an effective grounding system. It is essential that this standard safety requirement is observed and regularly tested. If in any doubt, please have the electrical installation inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate grounding system.
*INSTALLATION* Installation External draining of condensed water Note When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be externally drained away via the drain hose on the back of the dryer. This means that the condensed water container no longer has to be emptied. Drain hose length: 5.2 ft (1.6 m) Maximum delivery head: 3.
*INSTALLATION* Installation Changing the door hinging You can change the door hinging on this tumble dryer yourself. For safety reasons, the tumble dryer must be disconnected from the electricity supply before changing the door hinging. You will need: - a Torx T20 and T30 screwdriver - a flat head screwdriver or pointed pliers Hold the door securely and pull it forwards: to remove the door you will need to pull the base plate of the hinge with its 2 pins out of the dryer.
*INSTALLATION* Installation Turn the door lock by 180°. Press the door lock into the openings on the opposite side of the door opening. 3. Remove the lock catch from the door First take the rubber seal off the door and place this to one side. Adjust the position of the door lock so that the screw holes line up with those in the front panel of the dryer . Screw in both Torx screws in order to secure the door lock. Use a T20 Torx screwdriver to remove screw on the lock catch.
*INSTALLATION* Installation 4. Dismantle the door hinge from the door The door hinge cover must be unclipped from position and then removed. Remove the lock catch from the cover. This lock catch cover is no longer needed. Use a screwdriver to press down gently on position on the door hinge cover. Using a little force, pull out door hinge cover . This lock catch cover is no longer needed. Insert the lock catch into the new cover supplied with the dryer.
*INSTALLATION* Installation 5. Change the door hinge on the door The door hinge is secured to the door with 2 angled rods. These rods need to be removed with a screwdriver or pointed pliers. Tip: In some circumstances, the rods can be difficult to dislodge. Moving the screwdriver with a levering action while pulling at the same time may help to work the rods free. Remove the door hinge and turn it by 180°. Refit the door hinge on the opposite side of the door.
*INSTALLATION* Installation You now need the new door hinge cover supplied with the dryer. 6. Change the lock catch on the door You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch. Fit new door hinge cover and clip it into position. Push the lock catch cover with its lock catch into position. Tighten the screw .
*INSTALLATION* Installation Refitting Now that you have changed the 7. Refit the door door hinging, the door will open from the opposite side. Press the rubber seal back into the groove on the door. Position the door in front of the dryer. Fit the base of the door hinge with its 2 pins into the openings on the dryer. The base of the door hinge must be flush with the front panel of the dryer. The door cannot fall off in this position.
Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 3/4" (655 mm) Depth with door open 42 3/8" (1077 mm) Slot-in Yes Stackable Yes Weight Approx. 137 lbs (62 kg) Drum volume 31.7 gal (120 l) Load quantity 17.6 lb (8 kg) dry laundry Capacity of condensed water container 1.27 gal (4.8 l) Hose length 63" (1.60 m) Maximum head height 39 1/3" (1.
Programmable functions Programming You can use the programmable functions to alter the dryer's electronics to suit your requirements. Programming is carried out in these steps (, , ... ) using the sensor buttons. Accessing the programming level Before you begin, ensure the following: - The program selector is turned to a program. - The door of the dryer is open. Touch the Start/Add laundry sensor button and hold it down while carrying out steps –. Close the tumble-dryer door.
Programmable functions Editing and saving the programmable function Confirm the chosen selection with the Start/Add laundry sensor button. You can either switch a programmable function on/off or select different options. The number of the programmable function (e.g., ) will then light up again. The programmable function option will appear on the display as and a number: e.g., .
Programmable functions Drying levels “Normal” You can adjust the drying levels for the Normal program to one of seven different levels. Options = Even damper = Damper = A little damper = Factory setting = A little drier = Drier = Even drier Drying levels “Wrinklefree” You can adjust the drying levels for the Wrinkle-free program to one of seven different levels.
Programmable functions Code The code prevents your dryer being used without your knowledge. When the code has been activated, you have to enter the code after switching the dryer on. Otherwise, the dryer cannot be operated. Options = Off (factory setting) = On If the option has been selected, after switching on you will have to enter the code before you can operate the dryer. Using the tumble dryer with a PIN code After the dryer is switched on, will flash on the time display.
Programmable functions Control field switch-off status To save energy, the time display and sensor buttons will go out once the program has been running for 10 minutes. In this case, the Start/Add laundry sensor button flashes slowly. However, there is no switch-off in the event of a fault. Options = Off The time display and sensor buttons do not go out. = On (factory default) The time display and sensor buttons will go out once the program has been running for 10 minutes.
Programmable functions Buzzer on The buzzer sounds to let you know the program has finished. It can be switched on or off. The continuous tone which sounds when there are error messages is independent of the buzzer. Options = Off = On (factory setting) Airway indicator Lint should be removed after drying. The indicator light will also come on when a certain amount of lint has collected in the filters. You can decide at what level of lint this reminder should be given.
Programmable functions Display brightness dimmed The brightness of the dimmed sensor buttons in the control field can be set to one of 7 different levels. The brightness will change as soon as a different setting is chosen. Options = Darkest level = Factory default = Brightest level factory default The programmable functions are reset to the factory default settings.
Programmable functions Networking The , , and programmable functions are only displayed if the requirements for using Miele@home have been met (see “Miele@home” and “Initial set-up”). Switching off WiFi The network configuration should be reset whenever a tumble dryer is being disposed of or sold, or if a used tumble dryer is being put into operation. This is the only way to ensure that all personal data has been removed and the previous owner will no longer be able to access the tumble dryer.
Programmable functions - Some software updates can only be carried out by Miele Customer Service. Postponing the update Activating/deactivating Touch the sensor button. The RemoteUpdate function is activated by default. Available updates will be downloaded automatically but will only be installed if you initiate installation manually. Deactivate RemoteUpdate if you do not want any updates to be downloaded automatically.
Programmable functions Remote control You can use the Miele@mobile app to check the status of your tumble dryer from anywhere and start it remotely. You can also control it remotely via the MobileStart program. Remote control is automatically activated when you connect the tumble dryer to the WiFi network. You can switch off remote control if you do not want to operate the tumble dryer with your mobile device. A program can be canceled via the app even if this programmable function is switched off.
Programmable functions Copyrights and licenses for the communication module For the purpose of operating and controlling the communication module, Miele uses proprietary or third-party software that is not covered by open source licensing terms. This software/ these software components are protected by copyright. The copyrights held by Miele and third parties must be respected. This communication module contains software components which are distributed under open source license conditions.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 www.mieleusa.com Customer Support Phone: 888-99-MIELE (64353) info@mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
TXD 160 WP en-US M.-Nr.
