Operating instructions/Installation instructions

Table Of Contents
Frequently Asked Questions
Other problems
Problem Possible cause and solution
You can hear operating
noises (buzzing/hum-
ming).
This is not a fault. The compressor is operating.
These noises are quite normal and can be heard
when the compressor is operating.
A program does not
start.
There is no obvious cause.
Connect the power plug.
Turn on the tumble dryer.
Close the door.
Check whether the fuse has tripped.
Power outage? When power is restored, any
previously running program will restart
automatically.
Only the Start/Add
laundrysensor button
flashes slowly when the
program is running.
Once the program has been running for 10minutes,
the indicators go out. The Start/Add laundry sensor
button flashes slowly. This is not a fault, but a normal
function to help save energy.
Touch a sensor button to switch on the indicators.
See “Programmable functions – Control field
switch-off status”.
The tumble dryer is
switched off at the end
of the program.
The dryer switches off automatically to save energy.
This is not a fault, but a normal function.
To switch the dryer on, select a program.
The interior drum light-
ing does not come on.
The drum lighting switches off automatically ...
... when the door is closed.
... after a few minutes when the door is open to
save energy.
The drum lighting will come on when the door is
opened if the dryer is switched on.
55