Operating Instructions Heat-pump Dryer It is essential to read these operating instructions before installing, starting up, and using the appliance. This prevents both personal injury and damage to the appliance. en-US M.-Nr.
Contents Caring for the environment ............................................................................. 6 IMPORTANT SAFETY INSTRUCTIONS ............................................................ 7 Operating the tumble dryer .............................................................................. Control panel ....................................................................................................... Operating the sensor buttons...............................................
Contents Extra options...................................................................................................... Gentle .................................................................................................................. Freshen up........................................................................................................... Anti-crease .......................................................................................................... Buzzer......................
Contents Customer Service.............................................................................................. Contact in the event of a fault ............................................................................. Appliance warranty and product registration ...................................................... Optional accessories........................................................................................... 69 69 69 69 IMPORTANT SAFETY INSTRUCTIONS ...........................
Contents Brightness ........................................................................................................... Display............................................................................................................ Buttons active ................................................................................................ Buttons inactive.............................................................................................. Display switch-off...........................
Caring for the environment Disposal of packaging material Disposal of your old appliance The packaging material protects the dryer from transport damage. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances contain valuable materials. They also contain certain substances, compounds and components which were essential for the proper functioning and safe use of the equipment.
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: WARNING This tumble dryer is intended for use in domestic households and similar working and residential environments. It is essential to read all instructions before using the appliance. Do not allow children to play on or in the appliance. Close supervision is necessary when the appliance is used near children.
IMPORTANT SAFETY INSTRUCTIONS Important information regarding use of fabric softener sheets: We do not recommend use of fabric softener sheets. Use of fabric softener sheets can clog the surfaces of the lint filters, extending the drying time and increasing energy consumption. During subsequent cleaning, the plastic and surfaces of the lint filters can be damaged! The best results are obtained by using liquid fabric softener in the washing machine. Follow the manufacturer's instructions.
IMPORTANT SAFETY INSTRUCTIONS To prevent the risk of fire, the following textiles must not be dried in this dryer: - items which have not been washed. - items, such as work-wear, exposed to grease, oils, or other deposits (such as lotions or cosmetics) in your dryer. If these items have not been thoroughly cleaned there is a danger that they may contribute to a chemical reaction that could cause the laundry to ignite when heated even after being removed from the dryer.
IMPORTANT SAFETY INSTRUCTIONS Allow the dryer to complete each stage of the program selected, including the cooling down phase. This will ensure that the items being removed are not too hot to handle. Clean the lint filter before or after each load. Keep the area around the air intake (toe kick) and adjacent surrounding areas free from lint, dust and dirt. The interior of the machine should be cleaned periodically by qualified personnel. GROUNDING INSTRUCTIONS This appliance must be grounded.
IMPORTANT SAFETY INSTRUCTIONS Do not modify the plug provided with the appliance: if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Before installation, disconnect the tumble dryer from the electrical supply by shutting off the power main, unplugging the power cord or tripping the circuit breaker. Do not restore power until the installation is complete. Miele tumble dryers and Miele washing machines can be installed as a washer-dryer stack.
IMPORTANT SAFETY INSTRUCTIONS Heat-pump technology and refrigerant: The heat pump in this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temperature level and liquified by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place. - The humming noises caused by the heat pump during the drying process are normal.
IMPORTANT SAFETY INSTRUCTIONS Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. Store the fragrance flacon in its original packaging. Caution: The fragrance can leak out of the flacon! Make sure that you always keep the flacon, or the lint filter with the flacon inserted in it, in a horizontal position when carrying and do not tip or place it down on any surface.
IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity This appliance complies with Part 15 of the FCC regulations. This appliance has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and is subject to the following conditions: This appliance does not cause harmful interference. The appliances may be interconnected as desired.
Operating the tumble dryer Control panel a Control field The control field consists of a display and various sensor buttons. The individual sensor buttons are explained in the following sections. b Display The following values are displayed and/or selected on the display: 1. The program names, the drying level, and the duration of the selected program 2. The individual values of the selection lists for the settings c Sensor buttons The values in the display can be changed with the sensor buttons.
Operating the tumble dryer f Optical interface This is used by Miele service technicians as a transmission point. g Sensor buttons for extra options You can select extra options to augment the wash programs. If a drying program has been selected, the sensor buttons for the possible extra options light up dimly. h Sensor button You can use the sensor button to call up an energy consumption forecast for the selected drying program. i Sensor buttons The sensor button starts the delay start function.
Operating the tumble dryer Identifying the selected option Display The basic display shows the following for a drying level program: On Normal 0:55 OK - The selected drying level and the expected program duration - The drying level reached after the start of the program and the remaining program duration The basic display shows only the program duration for a time-controlled program: 2:00 OK OK An activated option in a list will have a check mark next to it.
Energy-saving tips This dryer with heat-pump technology is designed for energy-saving drying cycles. However, you can save a little more energy with the following measures as the drying time is not extended unnecessarily. - Make sure your laundry is spun at the maximum spin speed in the washing machine before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying, e.g., approx. 20% energy can be saved if spun at 1,600 rpm instead of 1,000 rpm.
Functioning of the heat-pump dryer Two separate circuits ensure that the laundry is dried: Dry air circuit The drying air flows through a heat exchanger, the drum, and several filters. This is ensured by a blower in the dryer. - The drying air flows through the heat exchanger in the longitudinal direction and is heated in the rear area. - The drying air is then blown into the drum, where it absorbs the moisture of the laundry.
Initial set-up Downtime after installation Damage caused by switching the appliance on too soon. This can damage the heat pump. After setting up the tumble dryer, wait for at least one hour before starting a drying program. Miele@home Your tumble dryer is equipped with an integrated WiFi module. To use this feature, you will need: - a WiFi network - the Miele@mobile app Removing the protective film and stickers - a Miele user account You can create a user account via the Miele@mobile app.
Initial set-up Availability of the WiFi connection The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can cause sporadic or even complete connection failures. Therefore, the availability of featured functions cannot be guaranteed. Miele@home availability The ability to use the Miele app depends on the availability of the Miele@home service in your country. The Miele@home service is not available in every country.
Initial set-up Switching on the tumble dryer Setting the display language Turn the program selector to the Cottons program. You will be asked to set the display language. It is possible to change the language at any time by setting the program selector to the More programs/ position in the Settings sub-menu. The welcome tone will sound and the welcome screen will light up. english (US) OK Touch the sensor button until the language you want appears in the display.
Initial set-up You will then be guided by the display and the Miele@mobile app. Before installing the dryer in its final location, ensure the signal strength is sufficient for your WiFi network. If the connection is successful, the following will appear in the display: Connection OK OK Confirm with the OK sensor button. Continuing set-up Confirm with the OK sensor button. Please see “1. Notes on correct laundry care” first.
1. Notes on correct laundry care Points to note regarding washed laundry - When washing very heavily soiled items, ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times. - Do not load the drum with items that are still soaking wet. Make sure your laundry is spun at the maximum spin speed before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying.
1. Notes on correct laundry care Drying Tip: See the “Program chart”. This describes the programs and gives their maximum load. - Always observe the maximum recommended load for each program. This will mean that the energy consumption for the amount of laundry is at its most economical. - Down-filled garments have linings which have a tendency to shrink, depending on the quality of the item. Only use the SoftSteam program for these items.
2. Selecting a program Switching on the tumble dryer Selecting a program The tumble dryer is switched on when you select a program and switched off by turning the program selector to the position. There are three possible ways to select a program. Turn the program selector to a program. 1.
2. Selecting a program 2. Selecting programs via the “More programs/” setting and the display 3. Selecting programs via the MobileStart program selector position and the Miele@mobile app Tip: In order to use MobileStart , the tumble dryer must be logged on to the WiFi network and Remote control must be switched on. Smoothing Turn the program selector. You can select the program you want via the display. Touch the sensor buttons until the program you want appears in the display.
3. Loading the tumble dryer Loading the laundry Textiles may be damaged. Before loading, read “1. Notes on correct laundry care”. Unfold the laundry and load loosely into the drum. Do not overload the drum. Overloading can cause unnecessary wear and tear to the laundry, give a disappointing drying result, and cause more creasing. Two sockets for inserting fragrance flacons The “Fragrance flacon” chapter describes how to use the fragrance flacon.
4. Selecting program settings Program settings Time-controlled and other programs Selecting the drying level for programs with a selectable drying level Time Dry, Cold Air, Basket, DryFresh Normal, Delicates, Bed Linens, Dress Shirts, Denims, SoftSteam, Express, Outdoor, Table Linens/Drapes, Smoothing, Wrinkle-free, Sportswear The preset drying level can be changed if required. You can change the duration in 10minute increments.
4. Selecting program settings Selecting an extra option Gentle Freshen up Anti-crease Buzzer Touch a sensor button to select the desired extra option. The relevant sensor button will light up brightly. Freshen up and Gentle cannot be combined, see “Extra options” for additional notes. Setting the delay start time Touch the sensor button. The following will appear in the display: Start in 00 :00 h OK Set the hours with the and sensor buttons. Confirm with the OK sensor button.
4. Selecting program settings Set a time value of 00:00 h with the sensor buttons. Confirm with the OK sensor button. The selected delay-start period has been canceled. After the program has started, the selected delay-start period can only be changed or canceled by interrupting the program. Adding laundry during ongoing Delay Start period Follow the description in “Changing the program sequence – Adding or removing laundry”.
5. Starting a program Starting a program Touch the flashing Start/Add laundry sensor button. The Start/Add laundry sensor button will light up and Drying appears in the display. Notes If a delay start time has been selected, then this will count down on the time display. At the end of the delay start time or immediately after the program has started (if no delay start time has been selected), the program duration will appear on the time display.
5. Starting a program - The drying level reached for the selected drying level program will light up in the display. - Before the program finishes, the laundry is cooled. Energy savings After 10 minutes, the indicators dim. The Start/Add laundry sensor button flashes slowly. Touch the Start/Add laundry sensor button to switch the indicators on again (this does not have any effect on a running program). The drum lighting switches off once the program has started.
6. Program end – removing the laundry Program end The program is finished when End/AntiCrease or End appears in the display. The Start/Add laundry sensor light goes out. The tumble dryer will switch off automatically 15 minutes after the end of the Anti-crease phase (with programs without an Anti-crease phase it will switch off 15 minutes after the end of the program). Removing the laundry Only open the door when the drying process has finished.
Program chart All weights marked with * are based on the weight of dry laundry. Normal Full load (17.6 lb/8 kg)* Extra dry, Normal Plus, Normal**, Slightly dry Items Single and multi-layered cotton items. For example, T-Shirts, underwear, baby clothes, workwear, jackets, covers, aprons, overalls, hand towels, bath towels, bathrobes, and flannelette/bed linen. Tip - Select Extra dry for multi-layered and very thick fabrics. - Do not use Extra dry for jersey fabrics (e.g.
Program chart Bed Linens Half load (8.8 lb/4 kg)* Extra dry, Normal Plus, Normal, Slightly dry, Hand Iron, Hand Iron, Machine iron Items Bed Linens Tip - Select Extra dry for multi-layered and very thick fabrics. - To prevent laundry from drying out it should be rolled up until you are ready for ironing. Woolens/Silks Items Small load (4.4 lb/2 kg)* - For woolen garments and fabric containing wool blends. For example, pullovers, knitted jackets, and pantyhose.
Program chart Smoothing Very small load (2.2 lb/1 kg)* Normal, Hand Iron Items - Cotton and linen fabric. - For minimum iron items made of cotton, mixed, or synthetic fiber. For example, pants, jackets, and shirts. Tip - This program smoothes out creasing caused during the spin cycle in the washing machine. - This program is also suitable for dry fabrics. - Please remove the garments as soon as the program has finished. SoftSteam Very small load (2.
Program chart Express Half load (8.8 lb/4 kg)* Extra dry, Normal Plus, Normal, Slightly dry, Hand Iron, Hand Iron, Machine Iron Items Suitable for resistant garments for the Normal program. Note The program duration is shortened. Outdoor Small load (5.5 lb/2.5 kg)* Normal, Hand Iron Items Outdoor clothing which is suitable for drying in a tumble dryer. More programs Time Dry Items Full load (17.6 lb/8 kg)* - For multi-layered fabric whose layers have different drying characteristics, e.g.
Program chart Pillows 1–2 pillows 15 3/4" (40 x 80 cm) or 1 pillow 31 1/2" (80 x 80 cm) Items Pillows suitable for drying in a tumble dryer, with feather, down, or synthetic fillings. Note/tip: - Items are dried to a Normal level only. - Pillows can still feel damp after being dried. You can use this program several times until the pillow feels dry. Cold Air Items Full load (17.6 lb/8 kg)* Any item which only needs airing. Proofing Small load (5.5 lb/2.
Program chart Basket Note Load for basket (7.7 lb/3.5 kg) - This program may only be used with the Miele dryer basket (optional accessory). - You must follow the operating instructions for the dryer basket. Fabric - You must follow the operating instructions for the dryer basket. type/Items - Only use this program to dry or air items which are suitable for drying in a tumble dryer but should not be physically tumbled. - Do not place shoes inside the drum for drying.
Extra options The drying programs can be augmented with various extra options. However, Freshen up and Gentle cannot be combined. Gentle Freshen up Anti-crease Buzzer Gentle Delicate fabrics (with the symbol on the care label, e.g., acrylic garments) are dried at a lower temperature and the program duration is longer. Anti-crease After the program has finished, the drum will continue to rotate in a certain rhythm.
Extra options Drying program chart – extra options 1 1 Freshen up Gentle Anti-crease Buzzer Normal X X X X Delicates – O X X Bed Linens – – X X Woolens/Silks – – – X Dress Shirts X X X X Denims X X X X Smoothing – O X X SoftSteam – – X X Express – – X X Outdoor – O X X Time Dry – X X X Table Linens/ Drapes – – X X Wrinkle-free X X X X Pillows – – X X Cold Air – – X X Proofing – – X X Basket – – – X Sportswear – O X
Changing the program sequence Changing a program once it has started It is no longer possible to change the selected program. This prevents the appliance being operated unintentionally. If you adjust the program selector, Change not possible will light up in the display. This indicator goes out when you select the original program. Canceling the current program Turn the program selector to the position. The program is canceled. You can now select a new program. Follow the prompt in the display.
Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying program. When the maximum level in the condensed water container is reached, the following message lights up in the display: Empty container See To delete the message: Open and close the door (with the dryer switched on). Empty the condensed water container. Replace the condensed water container in the dryer.
Condensed water container Preparing the condensed water container for the Steam Care program During the Steam Care program, the condensed water collected in the condensed water container is sprayed into the drum via a spray jet. The condensed water container must therefore be filled with water to at least the –min– marker. Otherwise, this could cause a fault. The –min– marker is at the front lefthand side of the container. 1 spout, 2 rubber seal Pour the water in through the rings of the spout 1.
Fragrance flacon FragranceDos Fragrance flacons (optional accessories) can be used to give your laundry a pleasant scent. This tumble dryer has 2 sockets for inserting fragrance flacons. This gives you a choice of how to use them. Removing the protective seal from the fragrance flacon Only hold the fragrance flacon as illustrated. Do not hold it at an angle or tip it as the fragrance will leak out of the flacon. - You can use both sockets if you wish to change from one fragrance to another.
Fragrance flacon Inserting a fragrance flacon Open the door of the tumble dryer. The fragrance flacon is inserted in the upper lint filter. There is one socket on the left-hand side of the recessed grip and another on the right-hand side. Insert the fragrance flacon as far it will go into the socket. The markers and must line up with one another. To open the cover, push the tab all the way up to the top. If you are not using a socket, keep its cover closed to prevent the accumulation of lint.
Fragrance flacon The fragrance will also be noticeable in the room air during the process. The Cold Air program will not generally apply fragrance. Closing the fragrance flacon After drying, the fragrance flacon should be closed to prevent the fragrance from escaping needlessly. Turn the outer ring clockwise a little. The fragrance flacon may slip out. Turn the outer ring so that the markers and line up. Setting the fragrance intensity Before drying, you can select the intensity of the fragrance.
Fragrance flacon Removing/replacing the fragrance flacon Turn the outer ring counterclockwise until the markers a and b line up. Replace the fragrance flacon with a new one. When not in use, you can store the fragrance flacon in its original packaging. Fragrance flacons are available to order from Miele dealers, Miele Customer Service, or online. Fragrance can leak out of the flacon. Do not lay the fragrance flacon down.
Cleaning and care Lint filters This tumble dryer has 2 lint filters in the door opening: the upper and lower lint filters trap lint produced during the drying process. Removing visible lint Tip: You can also use a vacuum cleaner so that you can remove the lint without touching it. Open the door. Clean the lint filters after each drying program. This prevents an extension of the program duration. Also clean the lint filters when this message appears in the display: Clean the lint and plinth filters.
Cleaning and care Remove the lint (see arrows) from the filter surface of all the lint filters and the perforated laundry deflector. Turn the yellow dial on the lower lint filter in the direction of the arrow (until you hear it click). Push the upper lint filter back into position until it clicks. Close the door.
Cleaning and care Cleaning the lint filters with water Wipe the smooth plastic surfaces of the lint filters with a damp cloth to clean them. Flush the lint filters through with warm running water. Shake the lint filters thoroughly and then dry them carefully. Hold the dial and pull the lint filter forward to remove it. Ensure the filters are dry before replacing them. Wet filters could cause operational faults. Push the lower lint filter in completely and lock it with the yellow dial.
Cleaning and care Cleaning instructions when using fabric softener sheets If you are using fabric softener sheets, please follow these warnings and instructions. Option 3 Wet the surfaces of the lint filters with a liquid color detergent (e.g., Miele Ultra Color Liquid Laundry Detergent). Leave it on for approx. 2 hours. First, clean the filters as de- Risk of fire! scribed in “Cleaning the lint filters with water”.
Cleaning and care Cleaning the plinth filter Clean the plinth filter when the program duration has been extended or when this message appears in the display: Clean the lint and plinth filters. See the Operating Instructions for more information. To delete the message: Confirm with OK. Removing the plinth filter Pull the plinth filter out by the handle. The right-hand guide pin comes out when the plinth filter is removed. The guide pin prevents the access panel from closing without the plinth filter.
Cleaning and care Cleaning the plinth filter Pull the handle out of the plinth filter. Clean the plinth filter thoroughly under running water. Install the plinth filter back on the handle. Make sure it is the correct way round. Squeeze the plinth filter very carefully several times as you rinse it. Rinse the plinth filter until all visible residues have been removed. Use a damp cloth to remove any lint from the handle. Damage caused by a damaged or worn plinth filter.
Cleaning and care Cleaning the plinth-filter access panel Cleaning the dryer Disconnect the tumble dryer from the electrical supply. Damage due to the use of unsuitable care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or all-purpose cleaners. Use a damp cloth to remove any lint. Make sure that you do not damage the rubber seal when doing this. Close the heat-exchanger access panel.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Some of the messages in the display are more than one line long. Touch the or sensor button to read them in full.
Frequently Asked Questions Message Possible cause and solution The system has been clogged by lint or detergent residue. To switch off the message: press OK. Clean the lint filters and the plinth filter. Clean plinth filter. lights up after a program has been canceled. See Please see “Cleaning and care” for notes on cleaning. Check that the lint filters and the plinth filter are not damaged or worn.
Frequently Asked Questions Message Possible cause and solution The condensed water container is full or there is a lights up after kink in the drain hose. Empty out the condensed water container. a program has been canceled. Check the drain hose. Empty container See To switch the fault message off: Open and close the door while the dryer is switched on or switch the dryer off and back on again.
Frequently Asked Questions Unsatisfactory drying results Problem Possible cause and solution The laundry is not suffi- The load consisted of different types of fabric. ciently dry. Finish drying using the Time Dry timed drying program. Select a more suitable program next time. Tip: You can alter the residual moisture level for some programs. See “Settings”. The laundry or featherfilled pillows develop a smell after drying. The laundry was washed with insufficient detergent.
Frequently Asked Questions The drying cycle duration is very long Problem Possible cause and solution The drying process goes on too long or even switches off.* The room where the tumble dryer is located is too warm. Ventilate the room thoroughly. Detergent residue, hair, and fine lint can clog the filters. Clean the lint filters and the plinth filter.
Frequently Asked Questions General problems with the tumble dryer Problem Possible cause and solution You can hear operating noises (buzzing/humming). This is not a fault. The compressor (heat pump) is operating. No action required. These noises are quite normal and can be heard when the compressor is operating. A program does not start. There is no obvious cause. Connect the power plug. Turn on the tumble dryer. Close the door. Check whether the fuse has tripped.
Frequently Asked Questions Replacing the plinth filter Deformation The heat exchanger can clog up. Replace the plinth filter immediately if you see the following signs of wear before or after cleaning (optional accessory). Poor fit Deformations indicate that the plinth filter has become worn. The edges of the plinth filter do not sit properly and the plinth filter is deformed. Lint will blow into the heat exchanger unfiltered through edges that do not sit properly.
Frequently Asked Questions Cracks, tears, indentations Lint will blow into the heat exchanger through cracks and tears. This will cause a permanent obstruction in the heat exchanger. 64 White residues or residues of other colors Residues arise from laundry fibers and traces of detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crust.
Frequently Asked Questions Reactivating the plinth filter You can reactivate one or more dirty plinth filters in the washing machine. You will then be able to use the plinth filter again. Prior to reactivation, check that the plinth filter is in good order. Check the plinth filter following the instructions provided in “Frequently Asked Questions – Replacing the plinth filter”. Replace the plinth filter if it has worn out. Wash the plinth filter(s) separately, not with any laundry items.
Frequently Asked Questions Cleaning the lint filter in the condensed water container In some circumstances, there can be problems running the Steam Care program. The lint filter at the end of the hose which is connected to the rubber seal in the condensed water container could be blocked. Guide the end of the hose through the opening and hold it securely with one hand. Use your other hand to pull the lint filter off the hose.
Frequently Asked Questions Replacing the blocked spray jet for the Steam Care program Limescale deposits will impair the spray jet. In this case, the spray jet must be removed and replaced with a new one (see “Optional accessories”). Open the door of the tumble dryer. The spray jet is located in the top left of the door opening. You can only replace the spray jet using a special tool. The special tool is supplied with the new spray jet. Using the wrong tool can cause damage.
Frequently Asked Questions Bottom right grille In general, the cooling fins behind the grille on the bottom right do not need cleaning. They should only be cleaned if the drying process is taking an exceptionally long time due to a very high level of dust or lint in the room in which the dryer is located. First open the panel for the plinth filter (bottom left). Danger of injury! Do not touch the cooling fins with your hands. You could cut yourself.
Customer Service Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.
IMPORTANT SAFETY INSTRUCTIONS , WARNING - Risk of Fire To reduce the risk of severe injury or death, follow all installation instructions. Clothes dryer installation must be performed by a qualified installer. Install the clothes dryer according to the manufacturer's instructions and local codes. Repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty.
IMPORTANT SAFETY INSTRUCTIONS The installation of this unit in non stationary locations (e.g. ships) must be performed by a qualified installer or service agency, in strict accordance with national and local safety regulations and standards. Do not install the machine in rooms where temperatures below freezing may occur. This dryer is not intended for wall-insert. If there is any doubt concerning installation, contact Miele’s Service Department. USA 888-99-MIELE(64353) service@mieleusa.
*INSTALLATION* Installation Front view a Drain hose for condensed water b Power cord – Observe the section entitled “Electrical connection”.
*INSTALLATION* Installation Rear view a Protruding lid for holding when moving the tumble dryer (see arrows) b Drain hose for condensed water c Hook for winding the power cord during transport d Power cord If the tumble dryer is being transported on its side, it must be tipped onto its left or right side. If the tumble dryer is being transported upright and you are using a hand truck, you must transport it with its left or right side resting on the truck.
*INSTALLATION* Installation Installation Leveling the tumble dryer Ensure that no closeable door, sliding door, or an oppositely hinged door is installed that would hinder the door of the dryer being opened in any way. Downtime after installation Damage caused by switching the appliance on too soon. This can damage the heat pump. After setting up the tumble dryer, wait for at least one hour before starting a drying program.
*INSTALLATION* Installation Before moving the tumble dryer again A small quantity of condensed water that remains in the area around the pump after the drying process can run out if the dryer is tilted. Recommendation: Start the Time Dry program for approx. 1 minute before transporting the dryer. Any remaining condensed water will then be fed into the condensed water container (which you will need to empty again) or out through the drain hose.
*INSTALLATION* Installation Installing the dryer in a floor-to-ceiling closet You can also insert a ventilation opening at the top of the closet. In addition, you must also provide an opening on the bottom side of the closet door. Direct ventilation is also possible via an air conditioning outlet in the closet. The air must be able to circulate freely at the top of the closet. The air supply must not be hindered by a shelf.
*INSTALLATION* Installation Product dimensions Dimensions 5.2 ft (1.6 m) drain hose, detachable, top right on the rear 6.
*INSTALLATION* Installation Electrical connection GROUNDING INSTRUCTIONS The electrical safety of this dryer can only be guaranteed when continuity is complete between it and an effective grounding system. It is essential that this standard safety requirement is observed and regularly tested. If in any doubt, please have the electrical installation inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate grounding system.
*INSTALLATION* Installation External draining of condensed water Note When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be externally drained away via the drain hose on the back of the dryer. This means that the condensed water container no longer has to be emptied. Drain hose length: 5.2 ft (1.6 m) Maximum delivery head: 3.
*INSTALLATION* Installation Changing the door hinging You can change the door hinging on this tumble dryer yourself. For safety reasons, the tumble dryer must be disconnected from the electricity supply before changing the door hinging. You will need: - a Torx T20 and T30 screwdriver - a flat head screwdriver or pointed pliers Hold the door securely and pull it forwards: to remove the door you will need to pull the base plate of the hinge with its 2 pins out of the dryer.
*INSTALLATION* Installation Turn the door lock by 180°. Press the door lock into the openings on the opposite side of the door opening. 3. Remove the lock catch from the door First take the rubber seal off the door and place this to one side. Adjust the position of the door lock so that the screw holes line up with those in the front panel of the dryer . Screw in both Torx screws in order to secure the door lock. Use a T20 Torx screwdriver to remove screw on the lock catch.
*INSTALLATION* Installation 4. Dismantle the door hinge from the door The door hinge cover must be unclipped from position and then removed. Remove the lock catch from the cover. This lock catch cover is no longer needed. Use a screwdriver to press down gently on position on the door hinge cover. Using a little force, pull out door hinge cover . This lock catch cover is no longer needed. Insert the lock catch into the new cover supplied with the dryer.
*INSTALLATION* Installation 5. Change the door hinge on the door The door hinge is secured to the door with 2 angled rods. These rods need to be removed with a screwdriver or pointed pliers. Tip: In some circumstances, the rods can be difficult to dislodge. Moving the screwdriver with a levering action while pulling at the same time may help to work the rods free. Remove the door hinge and turn it by 180°. Refit the door hinge on the opposite side of the door.
*INSTALLATION* Installation You now need the new door hinge cover supplied with the dryer. 6. Change the lock catch on the door You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch. Fit new door hinge cover and clip it into position. Push the lock catch cover with its lock catch into position. Tighten the screw .
*INSTALLATION* Installation Refitting Now that you have changed the 7. Refit the door door hinging, the door will open from the opposite side. Press the rubber seal back into the groove on the door. Position the door in front of the dryer. Fit the base of the door hinge with its 2 pins into the openings on the dryer. The base of the door hinge must be flush with the front panel of the dryer. The door cannot fall off in this position.
Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 5/8" (643 mm) Depth with door open 42 3/8" (1077 mm) Slot-in Yes Stackable Yes Weight Approx. 137 lbs (62 kg) Drum volume 31.7 gal (120 l) Load quantity 17.6 lb (8 kg) dry laundry Capacity of condensed water container 1.27 gal (4.8 l) Hose length 63" (1.60 m) Maximum head height 39 1/3" (1.
Settings Selecting settings Accessing settings You can alter the tumble dryer's electronics to suit your needs with the settings. The settings can be altered at any time. Turn the program selector to More programs/. Time Dry OK The following appears in the display: OK Confirm with the OK sensor button. Language - The sensor button scrolls down the list. - The sensor button scrolls up the list. Touch the OK sensor button to select the setting displayed.
Settings Language The display can be set to appear in one of several different languages. The flag after the word Language acts as a guide to prevent a language which will not be understood from being set. The language selected is saved to memory. Drying levels Welcome tone The volume for the welcome tone can be set to one of 7 different settings.
Settings Keypad tone Each touch of a sensor button is confirmed with an audible tone. Options - Off (default setting) - (quiet) - (loud) If a selection is not allowed, a negative signal tone sounds. Buzzer volume The buzzer sounds to let you know the program has finished. The buzzer can be set to be louder or quieter. Airway indicator Lint should be removed after drying.
Settings Conductivity This setting is only relevant for regions with very soft water. Very soft water can result in unsatisfactory drying results. You should only select this setting if the water used for washing the laundry is extremely soft with a conductivity reading (electrical conductivity) less than 150 μS/cm. Contact your local water supplier for the conductivity level of your water supply. Make a note of the new PIN code.
Settings Display switch-off To save energy, the display and sensor buttons will go out after 10 minutes. The Start/Add laundry button flashes slowly. You can alter this setting. Options - (default setting) The display will go out (after 10 minutes): On – if a program is not selected after the dryer has been switched on – during the current program – at the end of a program - Off The display will remain on (i.e., it will never go out). You can switch the display back on by touching any sensor button.
Settings Program info The program names and maximum load, which are lit in the display when the program is selected with the program selector, can be switched off. Options - Off - Program name - Prog.
Settings Remote control SmartGrid The Remote control setting is only visible if the Miele@home setting is set up and activated. The Remote control setting is only visible if the Miele@home setting is set up and activated. Once the Miele@mobile app has been installed on your mobile device, you can check the status of your tumble dryer from anywhere and start it remotely. You can also control it remotely via the MobileStart function.
Settings RemoteUpdate Running a RemoteUpdate The RemoteUpdate function is used for updating the software in your tumble dryer. If a RemoteUpdate is available for your tumble dryer, it will be displayed automatically for you. RemoteUpdate is activated by default. You can choose to start the RemoteUpdate immediately or wait until later. If you select “Start later”, the prompt to run the RemoteUpdate will be displayed again the next time you switch on your tumble dryer.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 www.mieleusa.com Customer Support Phone: 888-99-MIELE (64353) info@mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
TXI 680 WP en-US M.-Nr.
