Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- The display indicates messages or faults
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger unit
- Cleaning the lint filter in the condensed water container
- Replacing the blocked spray jet for the Steam Care program
- Bottom right grille
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Settings
Operating the tumble dryer
16
f
Optical interface
This is used by Miele service techni-
cians as a transmission point.
g
Sensor buttons for extra options
You can select extra options to aug-
ment the wash programs.
If a drying program has been se-
lected, the sensor buttons for the
possible extra options light up dimly.
h
Sensor button
You can use the sensor button to
call up an energy consumption fore-
cast for the selected drying program.
i
Sensor buttons
The sensor button starts the de-
lay start function. With the delay
start function, you can delay the
start of the program. The start of the
program can be delayed from
15minutes up to a maximum of
24hours. This allows you to make
use of night-time economy electric-
ity rates, for example.
Additional information can be found
in “4. Selecting program settings”.
j
Start/Add laundry sensor button
Touching the Start/Add laundrysen-
sor button starts a program. The
current program can be interrupted
to add laundry. The program can be
started when the sensor button is
flashing on and off. The sensor but-
ton lights up constantly once the
program has started.
k
Program selector
For selecting programs and for
switching off. The tumble dryer is
switched on when you select a pro-
gram, and switched off by turning
the program selector to the posi-
tion.
Operating the sensor buttons
The sensor buttons react to fingertip
contact. Selection is possible as long
as the respective sensor button is illu-
minated.
If a sensor button is brightly lit, this
means: currently selected
If a sensor button is dimly lit, this
means: selection possible