Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- The display indicates messages or faults
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger unit
- Cleaning the lint filter in the condensed water container
- Replacing the blocked spray jet for the Steam Care program
- Bottom right grille
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Settings
Operating the tumble dryer
17
Display
The basic display shows the following
for a drying level program:
OK
Normal 0:55
- The selected drying level and the ex-
pected program duration
- The drying level reached after the
start of the program and the remain-
ing program duration
The basic display shows only the pro-
gram duration for a time-controlled pro-
gram:
OK
2:00
Examples on how to operate
the appliance
Scrolling through a list
The scroll bar in the display indicates
that a selection is available.
OK
Language
Touching the sensor button scrolls
down the list to the next option and
touching the sensor button scrolls up
the list to the next option. The OK sen-
sor button is used to activate the option
in the display.
Identifying the selected option
OK
On
An activated option in a list will have a
check mark next to it.
Setting numerical values
OK
:0000
Start in h
The numerical value is highlighted in
white. Touching the sensor button
decreases the value and touching the
sensor button increases it. The OK sen-
sor button is used to activate the value
in the display.
Leaving a sub-menu
Select Back to exit a sub-menu.