Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- The display indicates messages or faults
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger unit
- Cleaning the lint filter in the condensed water container
- Replacing the blocked spray jet for the Steam Care program
- Bottom right grille
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Settings
Initial set-up
22
Switching on the tumble dryer
Turn the program selector to the Cot-
tons program.
The welcome tone will sound and the
welcome screen will light up.
Setting the display language
You will be asked to set the display lan-
guage. It is possible to change the lan-
guage at any time by setting the pro-
gram selector to the More programs/
position in the Settings sub-menu.
OK
english (US)
Touch the sensor button until the
language you want appears in the
display.
Confirm your language selection by
touching the OK button.
Setting up Miele@home
The following message appears in the
display:
Miele@home
Touch the OKsensor button.
OK
Set up now
To set up Miele@home now:
Touch the OK sensor button.
To postpone set-up until later:
Touch the sensor button until Set
up later appears in the display and
press the OK sensor button to con-
firm.
The following selection options appear
in the display:
1. Connect via WPS
2. Connect via App
Select the required connection type.