Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- The display indicates messages or faults
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger unit
- Cleaning the lint filter in the condensed water container
- Replacing the blocked spray jet for the Steam Care program
- Bottom right grille
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Settings
Initial set-up
23
You will then be guided by the display
and the Miele@mobile app.
Before installing the dryer in its final
location, ensure the signal strength is
sufficient for your WiFi network.
If the connection is successful, the fol-
lowing will appear in the display:
OK
Connection OK
Confirm with the OK sensor button.
You will require a WPS-compatible
router for the Connect via WPSconnec-
tion type.
Activate the WPS function on your
router within 2minutes.
Continuing set-up
Confirm with the OKsensor button.
Please see “1. Notes on correct laun-
dry care” first.
You can then select a program and
load the tumble dryer as described in
“2. Selecting a program“ and “3.
Loading the tumble dryer”.
The procedure for initial commissioning
is completed when a program lasting
longer than one hour has been carried
out in full.