Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- The display indicates messages or faults
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger unit
- Cleaning the lint filter in the condensed water container
- Replacing the blocked spray jet for the Steam Care program
- Bottom right grille
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Settings
3. Loading the tumble dryer
28
Loading the laundry
Textiles may be damaged.
Before loading, read “1. Notes on
correct laundry care”.
Unfold the laundry and load loosely
into the drum.
Do not overload the drum. Overload-
ing can cause unnecessary wear and
tear to the laundry, give a disappoint-
ing drying result, and cause more
creasing.
This can result in damage to the
laundry.
When closing the door, make sure
that laundry does not get trapped in
the door opening.
Twosockets for inserting fragrance
flacons
The “Fragrance flacon” chapter de-
scribes how to use the fragrance fla-
con.
If you are not using a fragrance flacon:
Push the tab down completely (see ar-
row) to close the socket. Otherwise,
lint will accumulate here.
Closing the door
Shut the door with a gentle swing.