Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- The display indicates messages or faults
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger unit
- Cleaning the lint filter in the condensed water container
- Replacing the blocked spray jet for the Steam Care program
- Bottom right grille
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Settings
5. Starting a program
33
- The drying level reached for the se-
lected drying level program will light
up in the display.
- Before the program finishes, the laun-
dry is cooled.
Energy savings
After 10minutes, the indicators dim.
The Start/Add laundry sensor button
flashes slowly.
Touch the Start/Add laundry sensor
button to switch the indicators on
again (this does not have any effect
on a running program).
The drum lighting switches off once the
program has started.
Adding laundry
You can add laundry after the program
has started.
Follow the description in “Changing
the program sequence – Adding or
removing laundry”.