Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- The display indicates messages or faults
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger unit
- Cleaning the lint filter in the condensed water container
- Replacing the blocked spray jet for the Steam Care program
- Bottom right grille
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Settings
Settings
88
Accessing settings
You can alter the tumble dryer's elec-
tronics to suit your needs with the set-
tings.
The settings can be altered at any
time.
Turn the program selector to More
programs/.
OK
Time Dry
Touch the sensor button once.
The following appears in the display:
OK
Settings
Confirm with the OKsensor button.
OK
Language
You are now in the Settings sub-menu.
Selecting settings
Touch the or sensor button until
the setting you want appears in the
display.
- The sensor button scrolls down
the list.
- The sensor button scrolls up the
list.
Touch the OK sensor button to select
the setting displayed.
Changing a setting
Touching the or sensor button
will call up the different options for
the setting.
For example, you can
- select a value (if the option is marked
with , it is active),
- change a bar chart,
- change numbers.
When the option you want appears in
the display, touch the OK sensor but-
ton to activate it.
Closing the Settings menu
Turn the program selector.