Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- The display indicates messages or faults
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger unit
- Cleaning the lint filter in the condensed water container
- Replacing the blocked spray jet for the Steam Care program
- Bottom right grille
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Settings
Settings
90
Keypad tone
Each touch of a sensor button is con-
firmed with an audible tone.
Options
- Off (default setting)
- (quiet)
- (loud)
If a selection is not allowed, a negative
signal tone sounds.
Buzzer volume
The buzzer sounds to let you know the
program has finished. The buzzer can
be set to be louder or quieter.
Options
- (quiet)
- (default setting)
- (loud)
Airway indicator
Lint should be removed after drying. In
addition, this indicator will remind you
to clean the filters when a certain
amount of lint has collected in them:
Clean plinth filter. See
You can decide at what level of lint
this reminder should be given.
Options
You will have an idea of how often this
should be done after a few drying pro-
grams.
- Off
This reminder does not appear. How-
ever, if there is a very severe block-
age in the ducting, the program will
be canceled and the fault message
Clean plinth filter. See
will appear in the display regardless
of this option.
- Heavy
The reminder only appears when
there is a heavy build-up of lint.
- Normal (default setting)
- Light
The reminder appears when there is
only a small build-up of lint.