Operating instructions/Installation instructions
Table Of Contents
- Contents
- Caring for the environment
- IMPORTANT SAFETY INSTRUCTIONS
- Operating the tumble dryer
- Energy-saving tips
- Functioning of the heat-pump dryer
- Initial set-up
- 1. Notes on correct laundry care
- 2. Selecting a program
- 3. Loading the tumble dryer
- 4. Selecting program settings
- 5. Starting a program
- 6. Program end – removing the laundry
- Program chart
- Extra options
- Changing the program sequence
- Condensed water container
- Fragrance flacon
- Cleaning and care
- Frequently Asked Questions
- The display indicates messages or faults
- Unsatisfactory drying results
- The drying cycle duration is very long
- General problems with the tumble dryer
- Replacing the plinth filter
- Reactivating the plinth filter
- Checking the heat exchanger unit
- Cleaning the lint filter in the condensed water container
- Replacing the blocked spray jet for the Steam Care program
- Bottom right grille
- Customer Service
- MIELE
- IMPORTANT SAFETY INSTRUCTIONS
- Installation
- Technical data
- Settings
Settings
93
Program info
The program names and maximum
load, which are lit in the display when
the program is selected with the pro-
gram selector, can be switched off.
Options
- Off (program name and load size are
not displayed)
- Program name (the load size does not
appear in the display)
- Prog. & Max load (both are displayed,
default setting)
Miele@home
Control the networking of your dryer
with your WiFi network.
The following points may appear in the
sub-menu:
– Set up
This message only appears if the tum-
ble dryer has not yet been connected to
a WiFi network.
Please refer to “Initial set-up” for in-
structions on how to set up the connec-
tion.
– Deactivate (visible if Miele@home is
activated)
Miele@home remains set up; the WiFi
function is turned off.
– Activate (visible if Miele@home is de-
activated)
The WiFi function is reactivated.
– Connection status (visible if
Miele@home is activated)
The following values are displayed:
- the quality of WiFi reception
- the network name
- the IP address
– Set up again (visible if set up)
Resets the WiFi login (network) to im-
mediately re-establish a new connec-
tion.
– Reset (visible if set up)
- The WiFi is switched off.
- The WiFi connection will be reset to
the default setting.
The network configuration should be re-
set whenever a tumble dryer is being
disposed of or sold, or if a used tumble
dryer is being put into operation. This is
the only way to ensure that all personal
data has been removed and the previ-
ous owner will no longer be able to ac-
cess the tumble dryer.
A new connection set-up has to be car-
ried out in order to use the Miele@home
setting again.