Operating instructions for Washing machine W 1901 WPS To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr.
Caring for our environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
Contents Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operating the washing machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Display . . . . . . . . . . . . . . . . . . . . . . . .
Contents Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 37 Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 The correct detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Water softeners . . . . . . . . . . . . . . .
Contents Removing the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Screwing out and adjusting the feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Building under a worktop . . . . . . . . . . .
Warning and Safety instructions This washing machine conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the washing machine, please read these instructions carefully before using it for the first time. They contain important information on its installation, safety, use and maintenance. Keep these instructions in a safe place and ensure that new users are familiar with the content.
Warning and Safety instructions Safety with children ~ Children 8 years and older may use, clean or maintain the washing machine without supervision only if they have been shown how to do so in a safe way and understand the hazards involved. ~ Children under 8 years of age must be kept away from the machine unless they are constantly supervised. ~ The washing machine is not a toy! To prevent the risk of injury, do not allow children to play with it or near it, or to play with the controls.
Warning and Safety instructions Technical safety ~ Before setting up the washing machine, check it for any externally visible damage. Do not install or use a damaged washing machine. ~ Before connecting the washing machine, ensure that the connection data on the data plate (voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician. ~ The electrical safety of this washing machine can only be guaranteed when correctly earthed.
Warning and Safety instructions ~ Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician. ~ If the connection cable is faulty it must only be replaced by a Miele approved service technician to protect the user from danger. ~ The machine must be isolated from the electricity supply in the event of a fault and during installation, maintenance and repair work.
Warning and Safety instructions Correct use ~ Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point. ~ Before using the washing machine for the first time, check that the transit bars at the rear of the machine have been removed (see section on "Installation and connection").
Warning and Safety instructions ~ If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. A special descaling agent is available to order from the Miele Spare Parts Department or via the internet on www.miele-shop.com.
Warning and Safety instructions Accessories ~ Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, guarantee, performance and product liability claims will be invalidated. Miele cannot be held liable for damage caused by noncompliance with these Warning and Safety instructions.
Operating the washing machine Control panel a PC / Optical interface This is used by service technicians to run diagnostic checks on your machine and can also be used to update programming data in the future. f Programme selector For selecting a programme. The indicator light next to the selected programme will come on. The programme selector can be turned clockwise or anti-clockwise. b Start/Stop button For starting the programme selected and cancelling a programme once it has started.
Operating the washing machine Display Multiple option selection If a value is selected there will be a tick 9 next to it. Further extras 9 Water plus ; 8 Extra quiet , Press the X or Y button to scroll down or up the options in the display. Press the OK button to select the highlighted value. You can now select the next value, if you wish. The display is operated using the Y, X and OK buttons.
Operating the washing machine The following are selected via the display – wash temperature – final spin speed – the soak time – delay start – cancellation of a programme – safety lock The following are selected via Further programmes/Settings 4 – Maintenance programme – Dark garments – Down filled items – Outerwear – Proofing – Separate rinse – Starch Optional programme packages Additional programme packages (containing a number of individual programmes) are available for downloading into your machine.
Before using for the first time Set the language Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened to prevent the risk of leaks during use. You will be asked to select the language you require for the display. It is possible to select another language at any time via Further programmes/ Settings 4 in the Settings sub-menu.
Before using for the first time Reminder to remove transport bars ,To avoid the risk of damage, the transport bars must be removed before the machine is used for the first time. See "Installation and connection" for instructions on how to do this. ^ After removing the transport bars (if this has not already been done by your fitter) press the OK button. Run your first programme Your machine is now ready for the first wash programme to be run. Cottons r 1400 rpm Duration: 2:59 h.
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy usage are determined by the size of the load. To make the most out of your machine, load the maximum dry load for the programme you are using. – Do not exceed the amounts of detergent recommended by the manufacturer on the packaging. – When smaller amounts of laundry are washed, the automatic load recognition system will reduce the amount of water, time and energy used.
How to wash correctly Brief instructions The headings numbered A, B, C, . . . show the operating sequence and can be used as brief instructions. A Sort the laundry ,If you use a solvent-based cleaning agent (e.g. one containing benzene) to pre-treat a stain, make sure that any plastic parts (e.g. buttons) are protected, and that the cleaning agent is rinsed off before washing the garment in the machine. ,Do not use solvent-based cleaning agents in or on this machine.
How to wash correctly B Switch on the washing machine D Select a programme C Load the drum Using the programme selector: ^ Press the Door button to open the drum door. ^ Unfold the laundry and load loosely into the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning. The most efficient use of energy and water is achieved when a full load is washed. However, do not overload as this causes creases and reduces cleaning efficiency.
How to wash correctly Using the programme selector at the Further programmes/Settings 4 position E Select a temperature / spin speed If required, you can change the suggested temperature and/or spin speed within a given range. Cottons r Duration: 1400 rpm 2:59 h. ^ Press the Y or X button to alter the temperature. ^ By pressing the OK button you switch to changing the spin speed and back again.
How to wash correctly F Select extra option(s) G Select Delay start (if required) The programme can be set to have a finish time up to 24 hours later. ^ Select any Extra options by either pressing the relevant button for the Extra, or by using the Further extras 4 button. Not all extra options are suitable for use with every programme. You can only select extra options which are compatible with the programme being used. See "Extra options" for more information. ^ Press the Delay start button.
How to wash correctly H Add detergent It is important to dispense the correct amount, because... . . . . . too little detergent results in: – Laundry not getting properly clean and with time it may become grey and hard to the touch. – Greasy particles clinging to the laundry. – Limescale deposits on the heater elements. . . . too much detergent results in: – Excessive foam which causes a low level of agitation and poor wash, rinse and spin results.
How to wash correctly I Start the programme ^ Press the flashing Start/Stop button. If a delay start time has been selected, then this will count down in the display. At the end of the delay start time or immediately after the programme has started (if a delay start time has not been selected) the estimated programme duration will appear in the display. During the first 8 minutes the machine measures how much water is being absorbed by the laundry.
Extra options Extra options are selected or deselected by pressing the appropriate button. Stains 4 There is a choice of various types of stains for achieving the optimum wash result with stain removal. Extra options will be added to the wash programme automatically, depending on the type of stain selected. With some stains, a tip about pre-treating the stain will appear in the display. You can select a maximum of three stains with each wash programme.
Extra options Pre-wash – To delete the soak duration For laundry with large amounts of dirt e.g. dust, sand. ^ Press the Further extras 4 button. Soak For heavily soiled items with protein stains. Further extras 9 Soak ; 8 Rinse hold , A duration of between 30 minutes and 6 hours can be chosen in 30 minute increments for the soak process. ^ Press the X or Y button until Soak is highlighted and deselect it with the OK button.
Extra options The following extra options can be selected in addition to the programme: se Rin # # Minimum iron # # # # # # # # Delicates # # # # # ins sh wa ar e t uie aq s plu 4 ns ld ho ak So # Pre # tr Ex # tr Ex # ter Wa # ort Sh # i Sta Cottons # Woollens / # Express 20 # 1) # # # # # # # Shirts # # Denim # # Automatic plus # # # # # # # # # # # Spin Maintenance programme Dark garments # Down filled items # Outerwear # # # # #
Spin Final spin speed Programme To omit the final spin (Rinse hold) rpm Cottons 1400 Minimum iron 1200 Delicates 600 Woollens / 1200 Express 20 1400 Shirts 600 Denim 900 Automatic plus 1200 Spin 1400 Maintenance prog. – Dark garments 1200 Down filled items 1200 Outerwear 800 Proofing 1000 Separate rinse 1400 Starch 1400 You can reduce the final spin speed. However, you cannot select a final spin speed higher than that shown in the chart above.
Programme chart Cottons 9876* cold to 90°C Max. load 7.0 kg Use for Cotton, linen or cotton mix fabrics, e.g. table linen, towelling, underwear, T-shirts etc. Note The 60°/40°C programmes differ from the r/s programmes as follows: – Shorter programme duration – Longer temperature holding times – Higher energy consumption Where particularly high levels of hygiene are required please select a temperature of 60°C or higher. r/s Cottons Max. load 7.
Programme chart Delicates 4321ac* cold to 60°C Max. load 2.5 kg Use for Delicate garments made from synthetic fibre, mixed fibre, rayon and easy care cotton. Curtains, including net curtains, specified as machine-washable by the manufacturer. Notes – Dust in curtains usually makes using a programme with prewash advisable. – Select No . (No spin) for items which crease easily. Woollens /ac* cold to 40°C Max. load 2.0 kg Use for Machine-washable or hand-washable wool or wool blend fabrics.
Programme chart Automatic plus 7621* cold to 40°C Max. load 5.0 kg Use for Mixed loads of garments suitable for the Cottons and Minimum iron programmes. Sort according to colour. Note The wash parameters (e.g. water level, wash rhythm and spin speed) are adjusted automatically in this programme to ensure the best possible care and wash result for each item. Spin Notes – To drain only: Select No . (No spin). – Make sure you select the appropriate spin speed. Maintenance prog.
Programme chart Outerwear cold to 40°C Max. load 2.5 kg Use for Outerwear made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER® etc. Notes – Zip up jackets before washing. – Do not use fabric conditioner. – If wished these garments can also be re-proofed using the Proofing programme. Proofing should not be done every time the garment is washed. Proofing 40°C Max. load 2.
Garment care label symbols Washing The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted.
Programme sequence Main wash Rinses Spinning Water level Wash rhythm Water level Rinses Interim spin Final spin Cottons d a ( 2-41)2) L L Minimum iron ( c e 2-33) L L Delicates e d e 3 – L Woollens / e f e 2 L L Express 20 d b d 1-33) L L Shirts e c e 2 – L Denim ( c e 3 – L Automatic plus ( abc e 2-3 L L – – – – – L Maintenance prog.
Programme sequence d = Low water level ( = Medium water level Special features in the programme sequences: e = High water level Anti-crease: a = Intensive rhythm b = Normal rhythm c = Gentle rhythm d = Sensitive rhythm e = Ultra sensitive rhythm f At the end of the programme, the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. Exception: There is no anti-crease phase in the Woollens programme.
Changing the programme sequence Cancelling a programme Interrupting a programme You can cancel a programme at any time after it has started. ^ Switch the machine off with the K button. ^ Press the Start/Stop button. To continue with the same programme: Options Cancel programme ; Activate safety lock , ^ Press the OK button. ^ Switch the machine back on again with the K button. Making changes to a programme The suds will be pumped away.
Changing the programme sequence Adding or removing laundry after a programme has started ^ Press the Door button to open the drum door. ^ Add or remove items. Safety lock The safety lock prevents the machine from being opened or the programme cancelled during a wash programme. ^ Close the drum door. To activate the safety lock The programme will continue automatically. ^ Press the Start/Stop button in after the programme has started.
Detergent The correct detergent All modern detergents produced for automatic washing machines are suitable. Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets are suitable for full loads, but note that it may be impractical to reduce tablets for smaller loads. Some tablets do not dissolve as rapidly as others, and may not be suitable for programmes with short durations.
Detergent Universal Detergent Detergent Specialist Proofing Fabric detergent for for detergent* agent** conditioner coloureds delicates Cottons X X – – – X Minimum iron X X – – – X Delicates X X X – – X Woollens / – – – X – X 1) X X – – – X Express 20 Shirts X X – – – X 1) X X X – – X Automatic plus X X – – – X Maintenance programme X – – X – – Dark garments1) X X X – – X Down filled items1) – X X X – – Outerwear1) – – X X –
Detergent The right amount to dispense will depend on the following: – The soiling level of the laundry Lightly soiled No visible dirt or stains. Possibly slight body odour. Normally soiled Visibly dirty and/or just a few slight stains. Heavily soiled Visible dirt and stains and/or dried on soiling. – The size of the load – The water hardness level. Check with your local water supplier if you do not know the hardness level in your area.
Detergent Fabric conditioners and liquid starch Fabric conditioner makes garments soft to handle and help prevent static cling when tumble drying. Starch stiffens and gives body to items of laundry, e.g. shirts, tablecloths and bed linen. Automatic dispensing of fabric conditioner or liquid starch to laundry at the end of a programme If starching frequently, thoroughly clean the dispenser compartment, especially the siphon tube and fabric conditioner channel, regularly.
Cleaning and care A range of Miele branded cleaning and conditioning agents is available to order from the Miele Spare Parts Department or via the internet at www.miele-shop.com. Cleaning the drum (Hygiene info) Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant smells to build up in the machine. The washing machine can be cleaned using the Maintenance programme. This should be always be run if the Hygiene Info message appears in the display.
Cleaning and care Cleaning the siphon and conditioner channel If starching frequently, thoroughly clean the siphon, the siphon tube and the fabric conditioner channel regularly. A build-up of liquid starch will cause them to get clogged. Cleaning the detergent dispenser drawer housing 1. Remove the siphon from compartment § and rinse under hot running water. Clean the siphon tube in the same way. 2. Replace the siphon.
Cleaning and care Cleaning the filter in the water inlet The washing machine has a filter to protect the water inlet valve. ^ First turn off the stopcock. ^ Unscrew the threaded union connecting the free end of the inlet hose to the stopcock. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more often if there are frequent interruptions to the external water supply. ^ Remove the rubber seal 1 from the recess.
Problem solving guide With the help of the following notes, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. ,Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous.
Problem solving guide One of the following fault messages appears in the display Fault message Possible cause Remedy1) 2 Fault Water intake Open stopcock The water inlet is blocked or restricted. 2 Fault Check drainage system – The water outlet is – Clean the drain filter and the drain pump. blocked or restricted. – The maximum delivery head is 1 m. – The drain hose has been fixed too high. L Waterproof system activated Close the stopcock The water protection – Close the stopcock.
Problem solving guide The following fault messages appear in the display at the end of the programme Fault message Possible cause Remedy Check detergent Excessive foam has built up during washing. Check: – the amount of detergent used. – Follow the instructions on the manufacturer's packaging and also take the degree of soiling of the laundry into account. Hygiene information. A programme using a temperature above 60°C has not been run for a long time.
Problem solving guide General problems Problem Possible cause Remedy The machine shakes during the spin cycle. The machine feet are not level. Level the machine (see "Installation and connection"). The laundry has not been spun properly and is still wet. The machine detected an imbalance during the final spin and reduced the spin speed automatically. Include both large and small items in the load as this will give better distribution.
Problem solving guide An unsatisfactory wash result Problem Possible cause Remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. Grey, greasy particles cling to washed laundry. Insufficient amounts of – Use more detergent. detergent were used – Before the next wash, run the to break down the Maintenance programme using particles of grease in Miele machine cleaner or a heavily soiled laundry.
Problem solving guide The door will not open Possible cause Remedy The machine is not Insert the plug in the socket and switch on, and/or connected to the switch the machine on with the K button. electricity supply and/or is not switched on. The safety lock has been activated. Deactivate the safety lock as described in "Changing the programme sequence - Safety lock". Access via a code has been activated. Deactivate the code as described in "Settings menu". Power cut.
Problem solving guide Opening the drum door in the event of a blocked drain outlet and/or power failure ^ Switch the washing machine off. There is a lever behind the detergent drawer fascia panel. ,Caution: if laundry has been washed at a high temperature, water draining out of the machine will still be hot. Danger of scalding! Procedure for draining the machine Be careful not to release too much water at once.
Problem solving guide Once the flow of water ceases: ,Make sure the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. To avoid loss of detergent, pour approx. 2 litres of water into the detergent dispenser drawer after cleaning the drain filter. Excess water will be pumped out automatically before the next wash programme. Opening the drum door ^ Remove the drain filter completely. ^ Clean it thoroughly. ^ Remove any foreign objects (e.g. buttons, coins, etc.
After sales service In the event of any faults which you cannot remedy yourself, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your machine, both of which are shown on the data plate visible above the porthole glass when the door is open.
Installation and connection Front view a Inlet hose with "Waterproof" system h Control panel b Electricity supply cable i Drum door c - f Flexible drain hose (with detachable swivel elbow) j Access to drain filter, drain pump and emergency release g Detergent dispenser drawer k Handle recesses for moving the machine l Four height adjustable feet 54
Installation and connection Rear view a Protruding lid for holding when moving the machine e Transport clip for inlet and drain hoses b Electricity supply cable f Safety cap for transit bars c Inlet hose with "Waterproof" system g Transport clip for inlet and drain hoses and for storing transit bars when not in use.
Installation and connection Installation surface A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note: ^ The machine must be level and securely positioned. ^ To avoid vibrations during spinning, the machine should not be installed on soft floor coverings.
Installation and connection ^ Using the spanner supplied, turn the left-hand transit bar 90°, then ^ Turn the right-hand transit bar 90°, then ^ withdraw the transit bar. ^ withdraw the transit bar.
Installation and connection ,To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed. ^ Secure the transit bars to the back of the washing machine. Make sure that the top catch is located above the holder. ^ Plug the holes with the plastic caps as illustrated. ,The machine must not be moved without the transit bars in place. Store them as shown or keep them in a safe place for future use.
Installation and connection Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered. ^ Use a spirit level to check the machine is standing level.
Installation and connection Building under a worktop ,The machine lid must not be removed. This washing machine can be pushed under a worktop with its lid in place, providing the worktop is high enough. Washer-dryer stack A Miele tumble dryer can be stacked with the washing machine. A WTV stacking kit is necessary which can be purchased from your Dealer, the Miele Spare Parts Department or via the internet on www.miele-shop.com.
Installation and connection The Miele Waterproof system The Miele Waterproof system protects the washing machine from water damage. The system consists of three main components: 1) the inlet hose 2) the electronic unit and the washing machine housing 3) the drain hose 1) Inlet hose – The inlet hose is fitted with an additional electrical safety valve which works like an automatic stopcock and is housed in the inlet hose connection box. – It is pressure tested to between 7,000 and 10,000 kPa.
Installation and connection Connection to the water supply ,The plastic casing of the safety valve contains electrical components. The Waterproof system must only be connected to its own stopcock. It must not be connected to mixer taps or similar and must not be fitted in areas where there is the risk of water or other liquids reaching it. The machine should be connected to the mains water supply in accordance with local and national safety regulations.
Installation and connection Maintenance and care If you intend to unscrew the Miele Waterproof system hose from the stopcock it is essential to disconnect the machine from the electricity supply first. Only use a Miele Waterproof system hose should you need a replacement. In order to protect the water inlet valve, the dirt filter in the water inlet valve connection must not be removed. Extension hose A 1.
Installation and connection Connection to the drainage system Please note: The machine drains via a drain pump with a delivery head of 1 metre*. The drain hose must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull. If required, the drain hose can be extended to a length of 5 m. The necessary parts can purchased from the Miele Spare Parts Department or your Miele dealer.
Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained.
Consumption data Load Cottons Consumption data Energy Water in kWh in litres Duration Residual moisture 90°C 7.0 kg 2.20 52 2 h 29 min 50% 60°C 7.0 kg 1.33 52 1 h 59 min 50% 60°C 3.5 kg 1.00 45 1 h 59 min 50% r* 7.0 kg 0.82 52 2 h 59 min 50% r* 3.5 kg 0.82 45 2 h 59 min 50% 40°C 7.0 kg 0.84 67 2 h 29 min 50% 40°C 3.5 kg 0.73 45 2 h 29 min 50% s 7.0 kg 0.70 52 2 h 59 min 50 % s* 3.5 kg 0.58 45 2 h 59 min 50% Minimum iron 40°C 3.5 kg 0.
Technical data Height 850 mm Width 595 mm Depth 656 mm Depth with door open 1092 mm Height for building under 850 mm Width for building under 600 mm Weight 99 kg Capacity 7 kg dry laundry Voltage See data plate Connected load See data plate Fuse rating See data plate Consumption data See "Consumption data" Minimum water flow pressure 100 kPa (1 bar) Maximum water flow pressure 1000 kPa (10 bar) Inlet hose length 1.60 m Drain hose length 1.
Settings menu Language ! The Settings menu can be used to alter the machine's electronics to suit changing requirements. Settings can be altered at any time. You can change the language via the Language sub-menu. To open the Settings menu ^ Switch on the machine. ^ Turn the programme selector to Further programmes/Settings 4. The following will appear in the display: Further programmes Settings ! Maintenance programme The display can be set to appear in one of several different languages.
Settings menu Time First select either a 24 hour or 12 hour clock. Then set the current time of day. Clock format ^ Use the X or Y button to highlight the clock format you want and confirm your selection with the OK button. Set the time of day Select the Set the time of day submenu. Use the X or Y button to set the time and confirm your selection with the OK button. Gentle action Activating Gentle action reduces the drum action and is suitable for washing slightly soiled items more gently.
Settings menu Lock code The code prevents the washing machine being used without your knowledge. When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated. To activate the code You will be prompted to enter a code. The code is 125 and cannot be altered. ^ Use the Y and X buttons to enter the first number. ^ Confirm the first number with OK and then enter the second number.
Settings menu Standby display To save energy, the display goes out and the indicator light for the Start/ Stop button starts flashing slowly. The display will always go out, – if a programme is not selected within 10 minutes of the washing machine being switched on. – 10 minutes after the end of a programme. Pressing one of the buttons switches the display back on again.
Optional accessories Miele washing machines offer perfect care for your laundry and feature a wide range of special programmes designed to suit the fabric being washed. Miele have also developed a range of specialist CareCollection detergents and conditioning products to offer you a complete package for cleaning and caring for your laundry. The Miele CareCollection detergents and conditioning products are listed below.
Optional accessories "UltraWhite" detergent Liquid detergent "For Delicates" This multi-purpose powder detergent has excellent stain removal properties and is suitable for white and light coloured laundry as well as heavily soiled coloured items. This liquid detergent is ideal for the gentle treatment of delicate fabrics, such as wool and silk. Its special formulation cleans effectively at temperatures as low as 20°C, while protecting the colour of your delicate garments.
Alteration rights reserved/4412/W 1901 WPS M.-Nr.