Operation Manual
Table Of Contents
- Contents
- Caring for our environment 2
- Warning and Safety instructions 6
- Operating the washing machine 13
- Before using for the first time 15
- Washing environmentally and economically 16
- How to wash correctly 17
- Spinning 22
- Programme chart 23
- Extras 26
- Garment care label symbols 27
- Programme sequence 28
- Changing the programme sequence 30
- Detergent 32
- Cleaning and care 36
- Problem solving guide 39
- The programme does not start 39
- The following fault messages appear in the display and the programme stops 40
- The following fault messages appear in the display at the end of the programme 41
- General problems 42
- An unsatisfactory wash result 43
- The drum door does not open when you press the Door button 44
- Opening the drum door in the event of a blocked drain outlet and/or power failure 45
- After sales service 47
- Installation and connection 48
- Consumption data 59
- Technical data 60
- Programmable functions 61
- To access programmable functions 61
- To select a programmable function 61
- To alter a programmable function 61
- To come out of programmable functions 61
- Language ! 61
- Water plus 62
- Gentle action 62
- Suds cooling 62
- Code 63
- Temperature unit 64
- Buzzer 64
- Keypad tone 64
- Brightness 64
- Contrast 64
- Standby display 65
- Memory 65
- Anti-crease 65
- Optional accessories 66
Cancelling a programme
You can cancel a programme at any
time after it has started.
^
Press the Start/Stop button.
Cancel programme
^
Press the flashing Start/Stop button
again.
The suds will be pumped away.
If you want to remove the laundry:
^
Press the Door button.
If you want to select a different
programme:
^ Switch the machine off with the
_ button.
^ Switch the washing machine back on
again.
^ Check that there is still detergent in
the detergent drawer. Add detergent,
if necessary.
^
Select and start a new programme.
Interrupting a programme
^
Switch the machine off with the
_ button.
To continue with the same programme:
^
Switch the machine back on with the
_ button.
Making changes to a
programme
After the start of a programme it is no
longer possible to select a different
programme.
Temperature
It is possible to select a different
temperature up to 5 minutes after the
programme has started.
^
Press the Temperature button.
Spin speed
It is possible to change the spin speed
up until the final spin begins.
^ Press the Spin speed button.
Extra options
It is possible to select or deselect the
Short and Water plus extra options up
to five minutes after the programme has
started.
A programme cannot be cancelled
or changed if the safety lock has
been activated.
Changing the programme sequence
30