Operation Manual
Table Of Contents
- Contents
- Caring for our environment 2
- Warning and Safety instructions 6
- Operating the washing machine 13
- Before using for the first time 15
- Washing environmentally and economically 16
- How to wash correctly 17
- Spinning 22
- Programme chart 23
- Extras 26
- Garment care label symbols 27
- Programme sequence 28
- Changing the programme sequence 30
- Detergent 32
- Cleaning and care 36
- Problem solving guide 39
- The programme does not start 39
- The following fault messages appear in the display and the programme stops 40
- The following fault messages appear in the display at the end of the programme 41
- General problems 42
- An unsatisfactory wash result 43
- The drum door does not open when you press the Door button 44
- Opening the drum door in the event of a blocked drain outlet and/or power failure 45
- After sales service 47
- Installation and connection 48
- Consumption data 59
- Technical data 60
- Programmable functions 61
- To access programmable functions 61
- To select a programmable function 61
- To alter a programmable function 61
- To come out of programmable functions 61
- Language ! 61
- Water plus 62
- Gentle action 62
- Suds cooling 62
- Code 63
- Temperature unit 64
- Buzzer 64
- Keypad tone 64
- Brightness 64
- Contrast 64
- Standby display 65
- Memory 65
- Anti-crease 65
- Optional accessories 66
Adding or removing laundry
after a programme has started
^
Press the Door button to open the
drum door.
^
Add or remove items.
^
Close the drum door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
which can lead to an increase in the
programme duration shown in the
display.
The door cannot be opened, if:
–
the suds temperature is above 55°C.
–
the water is above a certain level.
–
the programme has reached the
Final spin stage.
If you press the Door button when the
above conditions are present, the
following will appear in the display:
: Door locked
Safety lock
The safety lock prevents the machine
from being opened and programmes
from being cancelled during a wash
programme.
To activate the safety lock
^
Press and hold in the Start/Stop
button after the programme has
started.
Stop or in 3 secs 0
^
Keep the Start/Stop button pressed in
until the time has elapsed and the
following appears in the display:
Locked 0
The safety lock is now activated. It is
deactivated automatically at the end of
the programme.
To deactivate the safety lock
^ Press and hold in the Start/Stop
button after the programme has
started.
Unlock in 3 secs 0
^
Keep the Start/Stop button pressed in
until the time has elapsed and the
following appears in the display:
Unlocked 1
Changing the programme sequence
31