Operation Manual
Table Of Contents
- Contents
- Caring for our environment 2
- Warning and Safety instructions 6
- Operating the washing machine 13
- Before using for the first time 15
- Washing environmentally and economically 16
- How to wash correctly 17
- Spinning 22
- Programme chart 23
- Extras 26
- Garment care label symbols 27
- Programme sequence 28
- Changing the programme sequence 30
- Detergent 32
- Cleaning and care 36
- Problem solving guide 39
- The programme does not start 39
- The following fault messages appear in the display and the programme stops 40
- The following fault messages appear in the display at the end of the programme 41
- General problems 42
- An unsatisfactory wash result 43
- The drum door does not open when you press the Door button 44
- Opening the drum door in the event of a blocked drain outlet and/or power failure 45
- After sales service 47
- Installation and connection 48
- Consumption data 59
- Technical data 60
- Programmable functions 61
- To access programmable functions 61
- To select a programmable function 61
- To alter a programmable function 61
- To come out of programmable functions 61
- Language ! 61
- Water plus 62
- Gentle action 62
- Suds cooling 62
- Code 63
- Temperature unit 64
- Buzzer 64
- Keypad tone 64
- Brightness 64
- Contrast 64
- Standby display 65
- Memory 65
- Anti-crease 65
- Optional accessories 66
The following fault messages appear in the display at the end
of the programme
Fault message Possible cause Remedy
Heating fault
The washing machine
cannot heat.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
Chk detergent
Excessive foam has built
up during washing.
Use less detergent next time
and follow the manufacturer's
instructions on dosage given on
the packaging.
Hygiene info
No programme using a
temperature above 60°C
has been run for a long
time.
In order to prevent bacteria and
unpleasant smells building up
in the machine, run a Cottons
75°C programme using powder
detergent.
Problem solving guide
41